performance mods

well im new to this section of af so i figured id ask everybody for a list of there mods to get a better feel for the place

ill start off with the current ride
1984 nissan 300zx turbo

and as for the current mods are as follows

8.5 to 1 compression 89 maxima motor
turbo oil pump
turbo h2o pump
turbo injectors
turbo
heat wrap exhaust manifolds
msd blaster 2 coil
accell superstock 8mm ignition wires
ngk cool burning copper plugs
3" hardpiped intake
3" stainless steel mesh air filter
3" down pipe to dual 2 1\2" over axel pipes
boost controller set to 10 psi
full synthetic fluids(except antifreeze)
no power steering, ac completely removed
mechanicle fan replaced with electric fan
properly removed emisoins equipment
replaced heavy leather bodysonic seats with highback raceseats
removed all interior and shelled it
removed all sound deadening tar from floor pans
removed multiple layers of tin from floor (sound deading?)
fuzion zr1 tires (stock size 225 50 16)
adjustible fuel pressure regulator
removed spare tire and jack equipment
replaced rear wing with 86 300zxc rearwing
many gauges


probably more just cant think of them all

also have a 79 280 2+2 that im rebuilding
79 na motor with tthe thicker rings and an 83 turbo head all polished race prepped block head and all internals
looking for a good turbo to be able to run a good cool 20 psi through a big intercooler
yeah theres low compressoin there somewhere close to 7.1 or 7.2 to 1
could probably comb your hair in the piston tops


hope to hear from some of you and get an idea of what you guys have done

1995 Civic Coupe:

D15B VTEC
Comp Cams Camshaft
AEM Cam gear
OBX Pulleys
Intake
Header
Exhaust

Nothing special, but it atleast seperates me from the ricers, despite the big ol' fart can I have :lol:

all my mods are in the sig... and a K&N filter.

nothing special.

Mods in sig....welcome to the automobile orgy that is the racing section. :biggrin:

1996 GST Spyder

GReddy Upper and Lower intercooler piping
HKS SSQ
HKS filter
HKS hipower cat back
Koni struts
Skunk2 Coilovers
Apexi turbo timer

Welcome to the area

hmm... well my only mod doesnt make me any faster... atleast in a straight line. i made a custom strut tower brace. cost usually around $150 or more... my cost, free. but thats really no big deal as far as mods go

Jack












Squat

it isnt exactly a speed machien...but ill beat you down a dirt road or no road...
looking at exaust and intake, no headers made for it and no chips that do anything for it either.

My Grand Am is stock.

My Grand Am is stock.


lol...

and Mr. Lous casually leaves out the whole Trans Am thing...

it's hush hush. :sunglasse

2000 nissan maxima

custommaxima.com Y-pipe
Gutted Cat
HKS rear section
Custom-fabricated WAI
Progress springs

I think I listed all the things that makes a shit of difference in the car's performance.

and Mr. Lous casually leaves out the whole Trans Am thing...

it's hush hush. :sunglasse
Oh yeah, that car. :icon16:

1999 Pontiac Trans Am WS.6 #1747
29,200 miles

Texas Speed LQ9 402 stroker
•Mahle Coated Forged Pistons 4.005" Bore
•Mahle 1.5mm,1.5mm,3mm Rings
•Eagle 4340 Forged Stroker Crankshaft
•New GM Engine Block
•Clevite H Series Rod & Main Bearings
•GM Camshaft Bearings
•Complete Engine Balance & Assembly With Detailed Clearance Specs
•Lunati Pro Mod rods

•Texas Speed 'Giant' cam----248/254 629/622 113 LSA
•Patriot LS6 Stage III heads
•Kooks 1 7/8" stainless headers
•Custom 3" true duals
•LS6 ported oil pump
•COMP adjustable timing chain
•AutoMeter gauge pod with water temp, fuel pressure, and A/F gauges
•SPEC stage 5 clutch
•Aeromotive A1000 Fuel Pump
•Delphi 42# injectors
•LS1Speed silver fuel rails
•Aeromotive fuel pressure regulator
•Lunati lifters
•Fast LSx 90mm intake/90mm throttle body
•SLP lid
•SLP subframe connectors
•Spohn Panhard Bar
•Lou's Short Stick
•SLP 85mm MAF
•SLP smooth bellow
•SLP switch controlled linelock
•SLP strut tower brace
•Chrome lugnuts
•Black Collector's Edition WS.6 badge
•White faced gauges
•Custom Embroidered Headrests

1994 Camaro Z28
-QTP Electric Cutout
-Weight reduction: spare tire/jack

LOL...

I am currently between jobs now... once I get some money coming in, next in line will be LT headers and a CAI. I'm not doing too much yet because it is on 194,8--k miles :eek7: Once those are on, I'm saving for a while to get either a complete bottom end rebuild or a short block, either way it should end up being 355ci with some lighter pistons and rods, reworked crank, then I'll proceed with a 400+hp heads/cam package :evillol:

Car is in the sig

Stock block KA24DE(9.5:1 CR)
Garrett T04B
Revhard manifold
Turbonetics Evolution wastegate
BoostDesigns intercooler kit
Greddy Type S blow off valve
Enthalpy tuned ECU
615cc Deatschwerks injectors
300ZX MAFS
K&N cone filter
MSD Blaster SS coil (rewired with My mod (http://www.ka-t.org/tech))
Custom 3" downpipe fabricated by me
Apexi N1 exhaust
Autometer boost gauge
PLX M300 wideband O2 sensor
IAP oil line kit
Apexi SAFC
ACT clutch
Magnecor plug wires
modified PCV system
Walbro 255lph fuel pump rewired
300zx fuel filter
relocated battery
prolly more but I'm naming off the top of my head

give me a couple years and ill have a cool car like you guys
96 honda civic sedan d16y7
aem sr
bosch plugs/wires
apex 2.25 N1 catback
5zigen fighter 17's/ hankook k106
kyb agx gas adjustable shocks
h&r sport springs
cf hood
jdm black replica lights/sylvania silverstar
alpine/audiobahn sound w/ a little custom glasswork
tint
thats it! :smile:

oh yeah i do have a few camaros in the mix also
mine are quite mild and i see much more performance and able to make more power easier with the cars i have choosen so until i sell my 3 camaros(89 5 speed freshened up 350(rings bearings polished everything mild 470 lift cam and 56 cc stock heads approx 11 to 1 comp. ios about all that has thats good for it other than the 5 speed also has 3" exhaust custom bent by local shop , then i got a 87 also t top built up th350 trans (manual reverse valve body 600 ft lbs traction bar, limited slip posi rear axel also sporing ruffly the same single 3" exhaust only thing missing is the motor thingy.... seems to be mising,, then i have the last of my camaros it being a 1981 in near mint body but it is in d\ier need of paint and entire drivetrain short of a rear axel and the tranny is in it but has sat for nearly 12 years.... rebuild)

after that im left with my z series cars as i stated i have the 300 nearly completed for what i want
then comes my 280
and the combing hair meant that there was a mirror finish on the pistons not that they were bristly lol
then comes the last of all that i currently own at a 1986 300 zx currently rotted exterioir bodi(remarkabley the undercoated underside is near mint (already checked with the old screw driver technique that i was taught (i sorta made it a little more educated my using thinners to remove the under coating to shw bear m,etal in several spot the screw driver you just scratch some off)
of to with is gonna be roll caged and have absolutly no interior short of 2 racing bucket seats (you have to have a buddie for this one) a steering wheel the shifter and shit ton of gauges and a pretty roll cage to hold you close at night ......... oh wait sorry.......... and a set of low comp pistons (turbo bottom holds from the head gasket down with arp bolts up to 1000 hp.... not that ill get close to that but sorta like insurance) but any way im probably boring the oines that are still listening so
ill finish witht thias
remember the boosted 280 setup i said weith like 7.2 to one compression i figure im gonna throw in some 2 mm head gaskets on top of that to see...... talk about boost aught to hold a bit

2001 Accord v6 EX w/ leather

Mods:
Fram air filter
Oil change
Courtesy carwash
New brake light switch
driverside passenger door slight dent
passengers side rear door slight dent
paint chip on front bumper *weight reduction* :loser:
Missing a small chunk on the bottom of the rear bumper *more weight reduction*
Dirty leather seats
Dirty windows

I think that's all my mods.

nissans rip ass hard core import asnd rearwheel drive all in one whats not to love ... sounds like you got a nice car nissan finatic
sorry nissan fan nice list of mods what year?? early 90's?
also hopefiully this weekend ill be able to run some 1\8 mile track times im goin to atleast try see if my clutch holds up........ also try to get a weight in at the weight station...... mad weight reduction

Right now, 325i with CAI...if all goes according to plan, then it'll be a G35, and if all REALLY goes according to plan, a 996 Turbo...

errr alot to list

APEXi multi checker
Apexi SAFC II
Nismo 555cc injectors
Nismo shift knob
Blitz SBC Spec S electronic boost controller.
300ZX MAF
ACT heavy duty pressure plate
ACT street disc clutch
B & M short shifter
ported Revhard manifold
N sport 3 inch downpipe
T04E turbo .60 a/r comp .69 a/r turbine, 60 trim comp and p trim turbine wheel
Autometer fuel pressure guage
Autometer boost gauge
Walbro 255 lt/hr fuel pump
Greddy Type S bov
custom front out mount intercooler
89 nissan sentra electric fan conversion
Carbon fiber hood
carbon fiber interior trim
5 zigen FN01R-C 17x8 in front and 17x9 in back
Kumho ECSTA ASX 235mm front 275mm rear
KYB AGX front and rear shocks
Eibach pro kit springs front and rear
Suspension Technique sway bars front and rear
300ZX twin turbo brake caliper conversion
300ZX twin turbo brake master cylinder conversion
Axxis metal masters brake pads
PLX 300 wideband 02 sensor
GP sport 3 inch exhaust

i'm sure i forgot a few things here and there

edit:

yup i did

modified PCV system
JWT tuned ECU
300ZX fuel filter

Reading Lous's and Tat's mod lists gave me a headache :D

They give you a headache? They give me a boner... :icon16:

:disappoin...

They give you a headache? They give me a boner... :icon16:
:lol:

1990 Honda CRX Si
1.6L sohc
tsudo cai
dc sports ceramic coated header
cat-co hi-flow cat
custom 2" mid-pipe/resonator/axleback
Arospeed RS Racing SS fart can
Mild aftermarket cam
AEM Cam gear
Unorthodox Racing pulleys
Exedy Street/Strip Stage 1 carbon clutch
ACT 11.9# flywheel
Jacobs 8.5mm wires
Bosch plugs
Flexlight fan
a/c deleted
3/4 primered
sunroof deleted
scratching head on how to fix rear quarter panels
lots of miles and abuse...

They give you a headache? They give me a boner... :icon16:


You are a boner. :smokin:

You are a boner. :smokin:


shut up vato

They give you a headache? They give me a boner... :icon16:

awww i am so flattered. never thought other people would find my car sexy.

They give you a headache? They give me a boner... :icon16:

This is why I don't hang around this side of the forum anymore....

This is why I don't hang around this side of the forum anymore....


:confused:

well i do have a "list of mods" for my RX-7, i havent installed them yet (still waiting in my garage). here we go:

large street port 13b turbo motor
stock turbo with ported wastegate
HKS SSQV
Apexi SAFC-2
RC enginerring 720cc secondary injectors
HKS super mega flow intake
custom downpipe
(stock catback :P)
ACT 6 puck clutch
Hawk hps brake pads
rx7.com stainless steel brake and clutch lines

fiber images carbon fiber hood
Kei office KS-03 rims (mad rare) 17"
series 5 rx7 front bumper

i may go standalone on the rx7 and stick the safc on my 240sx (which is stock except for a shift knob), save some gas money

btw if anyone needs some 550cc injectors, pm me

2002 GMC 2500 HD-
Stock 6.0 iron block

1971 Camaro SS-Under construction (turbo not coming for a long time because of Cobalt :()
-4 bolt main 5.7 (450-470 estimated BHP)
-KB 10.5-1 CR hypereutectic pistons
-Isky 505/505 hydraulic cam
-Dart Iron Eagle 2.02/1.60 heads
-Holley street dominator intake manifold
-Proform 1.5 roller rockers
-Chevy black crinkle Bowtie valve covers/timing chain cover
-Holley 110 gph mechanical fuel pump
-Moog bearings/bushings all new in front end
-Moog front coil springs
-Monroe sensitrac front gas shocks
-Energy suspension body bushings & engine/tranny mounts
-Holley 750 double pumper carb w/ four corner idle
(A lot more to come)

2005 Cobalt SS/SC-
-Bone stock
-K&N CAI in mail
-Car almost back from dealership replacing motor(fucking GM would'nt go for a new car...those bastards :mad: )

2002 GMC 2500 HD-
Stock 6.0 iron block

1971 Camaro SS-Under construction (turbo not coming for a long time because of Cobalt :()
-4 bolt main 5.7 (450-470 estimated BHP)
-KB 10.5-1 CR hypereutectic pistons
-Isky 505/505 hydraulic cam
-Dart Iron Eagle 2.02/1.60 heads
-Holley street dominator intake manifold
-Proform 1.5 roller rockers
-Chevy black crinkle Bowtie valve covers/timing chain cover
-Holley 110 gph mechanical fuel pump
-Moog bearings/bushings all new in front end
-Moog front coil springs
-Monroe sensitrac front gas shocks
-Energy suspension body bushings & engine/tranny mounts
-Holley 750 double pumper carb w/ four corner idle
(A lot more to come)

2005 Cobalt SS/SC-
-Bone stock
-K&N CAI in mail
-Car almost back from dealership replacing motor(fucking GM would'nt go for a new car...those bastards :mad: )


Your not getting it replaced? what did GM say?

you should have had a lawyer write them a letter...

They give me a headache thinking about how much doing all that shit must have cost...I guess that's the price you pay for speed.

Mods-
E-fans
home made CAI
Under drive pullies in the mail
Flowmaster mufflers dumped under the bed.
X-pipe is next on the list.

nissans rip ass hard core import asnd rearwheel drive all in one whats not to love ... sounds like you got a nice car nissan finatic
sorry nissan fan nice list of mods what year?? early 90's?
also hopefiully this weekend ill be able to run some 1\8 mile track times im goin to atleast try see if my clutch holds up........ also try to get a weight in at the weight station...... mad weight reduction

Thanks.

1992 Nissan 240SX SE Fastback.

Reading Lous's and Tat's mod lists gave me a headache :D
Advil. :p

mods are in sig. some of the things not listed there that will be installed when I get my car back from the shop (which hopefully should be very soon).

Front brembos from an Evo 8
Stock wheels, 17x8, from an Evo 8 wrapped in 235/45/17 Falken Azenis st-115
Hallman pro mbc