for those who are wondering about it, im sure its possible, the measurements are almost the same.

Front Bumper
-----------------
P11 = about 59 inches
P10 = about 58 inches

ill try it myself and get back to you guys.

i've seen it done before

and so have i, but just clearing it up to those who want to try it. :D

...As I am mad interested. I want to put a P11 kit onto my P10 as well, but I am a newbie to all of this. I'll keep an eye out here to watch your progress.

hey guys do have you heard of guy call Henry or PrimeraGt. Well he lives 1 hour away from me. He has a p11 and I have a p10. Henry and myself will be test fitting P11 bumpers on my p10 really soon.

would i beable to fit a stillen front kit on my P10....cause if i could i would be soooooo happy i would like buy the whole board an ice cream!

haha
big Oomp ... check it out yall!~

nismog20, of course you can, anything is possible with the right work and money. but the stillen bumper is poly urethane, which is harder to cut than fiberglass so keep that in mind. i thought about it too though. :D

Ive done it, i reccomend reading the last few post replys in the "Is This a P11 Bumper" in the "Cosmetics" section of the G20 forum. I posted pictures of my car with a P11 front end, and P11 Rear spoiler mounted on my P10 96 G20. I also posted instruction on how to do it. Ive done a lot of work to my cars, including Custom fitting a Black Widow body kit to my 93 Pearl White G20 as well. Check out My Web Site: www.L3thalg20.homestead.com/main1.html
There are pics and info on it here, or e-mail for instructions, but i reccomend reading my posts.

AIM:: L3THALG20BOY E-Mail: Jason.Williams@BankofAmerica.com

Lethal.. if you were a girl I'd try and have sex with you.

Thats really amazing.. where can I find one of those Black Widow body Kits? How much is it? And is there a lot of hard work involved in getting it to fit? I am lazy..

Its impossible to find one for sale at a store or shop, your best bet would be to take a Civic kit and cut and mold it using fiberglass to fit the P10 G20

Or ill make you one

i saw a stillen front end riveted to the top part of a p10 bumber. it looked sweet.

http://www.automotiveforums.com/vbulletin/t4919.html

the pictures on this thread don't do it justice.

so, i'll take a double scoop of mint chocolate chip.

If you were to make me one.. how much would it cost including the cost for the bumper in the first place?

The P10 Black Widow kit that I custom made to fit my car took some time and labor getting everything exact, if you were to buy one from me for $325 (US Dollars), i would have it express mailed to you, with a Sandable Primer color of your choice.

That sounds awesome.. would it replace my current front bumper? Because I am in need of a new front bumper, and was thinking it would be a lot nicer to just replace the stock bumper with an aftermarket.

If anyone is interested in wondering why the P11 Rear Bumper will not fit the P10, check my web site: wwwL3thalg20,homestead.com/main1.html
This web Site also has pics of my 93 g20 with Black Widow Body Kit, my 96 G20 with P11 Parts fitted, and how to's on installing the P11 front Bumper to the P10. Check it out, im updating it almost daily with new info and detailed explanations.

So you charging $325.00
just for the black widow front bumper???

I have molded the stillen front bumper on my P10, it is pretty easy, all you do is cut the stock bumper two inches down and mold the stillen bumper on. It took us three days but it looks sweet. I post some pics soon.

Do you have any Pics of this Mod???