Does any1 know the best locations on an ecotech engine to hookup a grounding kit? Any help would be appreciated. Import Tuner mag installed a kit and dynoed it, said the third time was better due to different points the wires were installed at.

Here is a pic...

http://memimage.cardomain.net/member_images/4/web/676000-676999/676422_45_full.jpg

Here is a how to on a 2200... It should help you figure it out in the spaces you cannot really see.

http://www.ronus20.com/Cavalier/Grounding%20Kit/Before.JPG
Point # 1
http://www.ronus20.com/Cavalier/Grounding%20Kit/Point%201.JPG
point # 2
http://www.ronus20.com/Cavalier/Grounding%20Kit/Point%202.JPG
Here is grounding point # 3
http://www.ronus20.com/Cavalier/Grounding%20Kit/Point%203.JPG
Here is grounding point # 4
http://www.ronus20.com/Cavalier/Grounding%20Kit/Point%204.JPG
Here is grounding point # 5
http://www.ronus20.com/Cavalier/Grounding%20Kit/Point%205-1.JPG
Here is a closer look at grounding point # 5
http://www.ronus20.com/Cavalier/Grounding%20Kit/Point%205-2.JPG
Here is grounding point # 6
http://www.ronus20.com/Cavalier/Grounding%20Kit/Point%206.JPG
... and final one # 7
http://www.ronus20.com/Cavalier/Grounding%20Kit/Point%207.JPG

THe whole Shibang!
http://www.ronus20.com/Cavalier/Grounding%20Kit/After.JPG


-Ronus20

http://www.j-body.org/forums/read.php?f=50&i=10284&t=10284&start=175

POST on JBO with all the info and where i lifted this from.. look for Arnjolt who has this done to his Ecotec.

thanx, i really appreciate it.