Changing turn signal light bulb


Taurusdave
05-17-2005, 09:30 AM
Anyone know the best way to get to the turn signal bulb to replace it??

GMtech07
10-01-2005, 07:23 PM
Their is no good way. You have to remove the whole assembly from the back of the bumper(yes i am a cadillac tech) it's really a tight spot and a subbie ratchet type wrench is the best way to do it. (yes that tight)

bobco08108
06-23-2010, 07:56 AM
Owners manual says to go at it from under. I found it much easier to disassemble the grille fascia then remove the headlight assembly and the signal housing.

krivasauto
10-11-2010, 11:34 AM
Owners manual says to go at it from under. I found it much easier to disassemble the grille fascia then remove the headlight assembly and the signal housing.
Too late for the OP, but for the rest of you, try srxturnsignals.shutterfly.com (http://srxturnsignals.shutterfly.com)

zdld17
02-06-2011, 10:40 AM
In case you are not aware, there is a TSB Campaign bulletin out on this, Supposed to be covered under a warranty or campaign repair.
I recently had my 06 taken care of.

samprix
02-22-2011, 04:33 PM
Yes, there was a problem with the light sockets getting too hot, believe. The dealer took care of my '05, but only after I realized that the fix was covered, on the second outage.

ktrsb
12-02-2011, 12:33 PM
Yes, there was a problem with the light sockets getting too hot, believe. The dealer took care of my '05, but only after I realized that the fix was covered, on the second outage.

The new parts and part numbers are at srxturnsignals.shutterfly.com. I made this repair years ago and have not had a problem since.

Add your comment to this topic!