Here's another on the rocks...

Now that's the way a real truck does it....Dragging the bumper and all. Not like those SISSY SUV Xterra's....:devil:

Cliff
Flame suit Ready...:sun:

He made it up the rise, had plenty of room on the bumper. Ground his reciever a bit though!

Here is Mike's Frontier after having his ARB installed. Notice he painted his grill black, hiding that nasty chrome!

Looks very nice! Glad he blacked out the chrome! It just doesn't go with the ARB blackness!

I thought the plate hangs way to far down when your offroading so I took it off and mounted it at the bottom holes. I didn't have a spacer so I used nuts instead! I also put a piece of foam on th back to keep the plate from rattling.

Thats a lot of nuts!!!! :D

i know it's a lot of nuts! :D I just need to get some spacers made!

Originally posted by rrdstarr
i know it's a lot of nuts! :D I just need to get some spacers made!

Why not buy some conduit at the local hardware store and cut it to fit? That would work fine and should be super cheap! Plus you can buy Galv. conduit that won't rust. Good luck...

Looks great! My bolt holes were off just the opposite. My bumper is about an 1/8 th off dropping to the front. I did have to take a sawzall to the Warn roller fairlead to get it to mount under the the ARB area. Did anyone else have this problem?

Also, I've emailed SLR twice about the Bilstein shock recommendation for running the ARB. I've had no response yet (2 weeks now) is this typical? And what are you folks running? There is a four wheel shop here that stocks the complete line of shocks, deal mostly with full size trucks and do not carry any ARB products. Any info would be greatly appreciated.

Thanks!!
:cool:

SLR never responds to email, and when they do it takes forever. just call them they'll tell you 20% stiffer bilsteins but they wont give you part numbers so be prepared to give them your credit card number.

Bilstein P/N's

Front:

B46-1099-H1 4X2
B46-1099-H2 4X4
B46-1099-H0 4X4 valved for extra weight of winch

Rear:

BE3-6422-H0 stock
F4-B46-2126-H0 for use without rear sway bar and with 2 inches of lift

Call Spencer at SLR if you don't get e-mail. He's not very up to date on his e-mail.