Adding Keyless Entry - 2001 Blazer

I am trying to add Keyless entry to a 2001 Blazer that has power locks, but was not originally equipped with Keyless entry. I have the correct key fob and have also installed the RCDLR under the driver's side dash. I understand that the BCM must "learn" that I now have Keyless entry, but have no idea how this is done. Any help would be appreciated.

Thanks
GMPowered

I am trying to add Keyless entry to a 2001 Blazer that has power locks, but was not originally equipped with Keyless entry. I have the correct key fob and have also installed the RCDLR under the driver's side dash. I understand that the BCM must "learn" that I now have Keyless entry, but have no idea how this is done. Any help would be appreciated.


Did you ever get this figured out? You might find your answer in this thread:
Automotive Forums - Keyless Entry Questions (http://www.automotiveforums.com/vbulletin/showthread.php?t=67742&page=1&pp=15)

Where did you find an aftermarket RCDLR? What does it look like? I've got a 2000 Blazer LS that I'd like to do the same thing to, but want to make sure it doesn't already have one.

Not aftermarket, I bought the GM RCDLR, part number 15042969 (any GM dealer.)

It is located under the driver side dash near the parking brake release. It is a small box about 3" x 2". If the box is not there then you should see the wiring connector.

I still haven't figured out exactly what needs to be done to re-program the BCM..............Any ideas??

GMPowered