240sx owner...need some info on 300zx brakes
KaisenH
03-31-2005, 11:53 PM
Whats up guys, i own a 240sx but i am doing a brake swap on my car. I am putting on 30mm aluminum 300zx calipers and brembo rotors on the front. I already have the stainless steal conversion lines and brake pads. I now need to order a caliper hardware kit consisting of pad pins, pad
spring clip, and pad pin clips. My question is how of each are required for EACH caliper. Im not 100% sure but i think its 2 pad pins per caliper, 1 spring clip per caliper, and 1 pad pin clip per caliper. Is this right?
thanx for helpin out a fellow nissan owner!
shift_baby Z
spring clip, and pad pin clips. My question is how of each are required for EACH caliper. Im not 100% sure but i think its 2 pad pins per caliper, 1 spring clip per caliper, and 1 pad pin clip per caliper. Is this right?
thanx for helpin out a fellow nissan owner!
shift_baby Z
ExTrEmEDrIfT
03-31-2005, 11:54 PM
yah i think tahst right
Hodo
04-01-2005, 11:39 AM
been a while since I didnt my brakes but that sounds about right. Check out 300ZXclub.com I am sure there is a online manual for the 300ZX Z32 chassis on there, and you can check for yourself to see what all is on the brake calipers and all.
k3smostwanted
04-01-2005, 07:03 PM
there is 2 pins but everything else is right...
and you should have gotten the 30mm iron calipers...the aluminum's have a tendency to warp after so many miles and heat. but i think nissan caught this "problem" after the first year of production on the Z32.
and you should have gotten the 30mm iron calipers...the aluminum's have a tendency to warp after so many miles and heat. but i think nissan caught this "problem" after the first year of production on the Z32.
Automotive Network, Inc., Copyright ©2024