1995 Riviera DLC and Remote programing
itch1223
03-14-2005, 03:49 PM
Followed a few threads but still can not find the DLC on my 1995 Riviera! Can any one help. I am looking for fuse 4 and 8. Does anyone have a picture? Thanks Dave
MRSMOOTH
03-22-2005, 11:33 AM
YEAH DAVE IF U LOOK RIGHT UNDER THE STERING COLUME AND UNDER THAT SIDE OF THE DASH U WILL SEE A PLUG
__________________
\ OOOOOOOO /
\__OOOOOOOO__/
IT IS THE PART WHER IF U GO TO THE MACHANICH THEY ATACH THE COPUTER TOOL TO TO DO A DIAGNOSTIC CHECH. WHEN U FIND THAT U WILL SEE THAT INSIDE EACH PINE THEIR IS GOING TO BE A METAL PIN OR THEIR WILL BE NOTHING THEIR. NOW HOW WOULD U KNOW WHICH ONE IS NUMBER 4 AND WHICH IS NUMBER 8 JUST COUNT FROM THE LEFT TO RIGHT AS EACH SLOT IN THE PIC. APOVE WILL COUNT AS ONE IF U COUNT RIGHT NUMBER FOUR AND NUMBER EIGHT SHOULD EACH HAVE A MEATEL PINE INSIDE THEM. WHAT U DO NEXT IS THAT U COULD EATHER U A WIRE TO JUMBE THEM OR A PAPER CLIP OLWAYS WORKED FOR ME. JUST INSERT ONE END OF THE WIRE IN SLOT #4 AND THE OTHER END IN SLOT #8 CLOSE ALL THE DORES AND THEN TURN THE EGNITION ON. THE LOCKS WILL LOCK AND UNLOUK THIS WILL TEAL U THAT U ARE READY TO PROGRAM UR REMOT, JUST SIMPLY HOLD DOWN ONE OF THE FUNCTIONS AND IT WILL LAUCK AND UNLOUCK THEN JUST REMOVE THE JUMBER AND START THE CAR TO EXIT PROGRAMING MOOD
HOPE THIS WAS A LITTEL MOOR HELP TO U
TECH WIZ :smokin:
__________________
\ OOOOOOOO /
\__OOOOOOOO__/
IT IS THE PART WHER IF U GO TO THE MACHANICH THEY ATACH THE COPUTER TOOL TO TO DO A DIAGNOSTIC CHECH. WHEN U FIND THAT U WILL SEE THAT INSIDE EACH PINE THEIR IS GOING TO BE A METAL PIN OR THEIR WILL BE NOTHING THEIR. NOW HOW WOULD U KNOW WHICH ONE IS NUMBER 4 AND WHICH IS NUMBER 8 JUST COUNT FROM THE LEFT TO RIGHT AS EACH SLOT IN THE PIC. APOVE WILL COUNT AS ONE IF U COUNT RIGHT NUMBER FOUR AND NUMBER EIGHT SHOULD EACH HAVE A MEATEL PINE INSIDE THEM. WHAT U DO NEXT IS THAT U COULD EATHER U A WIRE TO JUMBE THEM OR A PAPER CLIP OLWAYS WORKED FOR ME. JUST INSERT ONE END OF THE WIRE IN SLOT #4 AND THE OTHER END IN SLOT #8 CLOSE ALL THE DORES AND THEN TURN THE EGNITION ON. THE LOCKS WILL LOCK AND UNLOUK THIS WILL TEAL U THAT U ARE READY TO PROGRAM UR REMOT, JUST SIMPLY HOLD DOWN ONE OF THE FUNCTIONS AND IT WILL LAUCK AND UNLOUCK THEN JUST REMOVE THE JUMBER AND START THE CAR TO EXIT PROGRAMING MOOD
HOPE THIS WAS A LITTEL MOOR HELP TO U
TECH WIZ :smokin:
itch1223
03-25-2005, 12:42 PM
Smokin,
Thanks for the help. It was pretty easy. One question. The drivers side door does not respond to the remote. It makes a noise but the lock does not budge. The passenger door and the truck work great! Any thoughts?
Dave
Thanks for the help. It was pretty easy. One question. The drivers side door does not respond to the remote. It makes a noise but the lock does not budge. The passenger door and the truck work great! Any thoughts?
Dave
MRSMOOTH
03-25-2005, 05:33 PM
Smokin,
Thanks for the help. It was pretty easy. One question. The drivers side door does not respond to the remote. It makes a noise but the lock does not budge. The passenger door and the truck work great! Any thoughts?
Dave
EVERY ONE OF THOSE DORE LOCKS HAS A MOTOR THAT LIFTS THE LOCK SO ACORING TO WHAT YOU ARE SAYING IT SOUND THE 99% IT WILL BE THE MOTOR IT IS A SMALE ONE U COULD GO TO ANY JUNK YEARD AND PICK ONE UP FOR A VERY LITTEL MONY. AND IT IS EASY TO INSTAL JUST REMOVE THE DORE PANEL AND U WILL SEE IT
Thanks for the help. It was pretty easy. One question. The drivers side door does not respond to the remote. It makes a noise but the lock does not budge. The passenger door and the truck work great! Any thoughts?
Dave
EVERY ONE OF THOSE DORE LOCKS HAS A MOTOR THAT LIFTS THE LOCK SO ACORING TO WHAT YOU ARE SAYING IT SOUND THE 99% IT WILL BE THE MOTOR IT IS A SMALE ONE U COULD GO TO ANY JUNK YEARD AND PICK ONE UP FOR A VERY LITTEL MONY. AND IT IS EASY TO INSTAL JUST REMOVE THE DORE PANEL AND U WILL SEE IT
Automotive Network, Inc., Copyright ©2024