Left headlamp seems to be hanging loose, right one is foggy and needs to be replaced. Someone obviously replaced the left headlamp and turn signal assemblies after a minor fender bender. Now I have the pleasure of replacing the right one. Just purchased the headlamp ($116) and can't figure out any way to remove the old one. I don't remember ever having such a problem before. Am I just stupid? (well, maybe I am, but that's no help!)

Any info you can offer would be appreciated.

No your not stupid, The design is.
Just grab the lens on each side and pull
The lens is held in place with a few ball and socket connectors.
Don't do it in the cold the plastic sockets become brittle.
put a little lube on the balls before you put the lens back in it'll make it easier to install.

No your not stupid, The design is.
Just grab the lens on each side and pull
The lens is held in place with a few ball and socket connectors.
Don't do it in the cold the plastic sockets become brittle.
put a little lube on the balls before you put the lens back in it'll make it easier to install.

Mike, Today you are my hero. Saved me a lot of headaches and maybe unnecessary expense. It popped out fairly easily once you explained it (and before I destroyed something) Now I have to figure out what the previous owner screwed up on the other head lamp. Maybe something just as simple. He probably knew about as much as I did! Not much. Thanks again!!!