is there anyway to disable daytime running headlights, without disableing the highbeams, i found out if you pull up on the E brake just enough to get to the first click, this works fine, but then your brake light is on, any other suggestions would be greatly appreciated

is there anyway to disable daytime running headlights, without disableing the highbeams, i found out if you pull up on the E brake just enough to get to the first click, this works fine, but then your brake light is on, any other suggestions would be greatly appreciated




why????? :grinno:

why????? :grinno:

well billybob, i was just wondering....

KJRICH, i tried the link you posted, it works, however the part it says about the passenger side high beam fix, by putting a little jumper wire in slot 30, and it slot 87a, mine are just labeled, 1 2 3 4 and 5, there is no 30 or 87a, do you have any idea which ones are which??? or does anyone else???

KJRICH, i tried the link you posted, it works, however the part it says about the passenger side high beam fix, by putting a little jumper wire in slot 30, and it slot 87a, mine are just labeled, 1 2 3 4 and 5, there is no 30 or 87a, do you have any idea which ones are which??? or does anyone else???

1=86
2=85
3=87a
4=30
5=87

1&2 are the coil
5 is ground
3&4 are the relay contacts

hope this helps..I have a 99 and currently my DRL and low beams do not work..pain in the arse!!

hey thanks alot, but i figured it out almost a month ago