I just installed my JDM engine into my 1991 Geo Metro Convertible. Everything seems to be hooked up correctly. The engine will turn and I'm getting good spark. However, there is no "hum" sound from the fuel pump when I turn the key to the "on" position.

I'm not sure how to check the fuel pump relay as electronics is not something I'm very familiar with. It's taken me a month of Sunday's to get this far and I'd really like to get back on the road again!

Thanks for any assistance,

GeoMetron

I just installed my JDM engine into my 1991 Geo Metro Convertible. Everything seems to be hooked up correctly. The engine will turn and I'm getting good spark. However, there is no "hum" sound from the fuel pump when I turn the key to the "on" position.

I'm not sure how to check the fuel pump relay as electronics is not something I'm very familiar with. It's taken me a month of Sunday's to get this far and I'd really like to get back on the road again!

Thanks for any assistance,

GeoMetron

Hey, ya know in my post above where I said everything seemed to be hooked up correctly. Well, not so much. I snapped the fuel relay in place but uh...sort of didn't so much actually check to see that it was connected underneath.

DOH! :loser:

I'm on the road again.