|
|
1987 rx-7kxbrian 01-27-2005, 08:39 PM if you can please help.My girlfriends cluch pedel went to the floor.I replaced the slave and the master cyl,and it works now,but i tried to start it and it seems like the motor is locked up,starter is good and battery to.I tried rocking the car in gear but engine wont move. mcs 01-28-2005, 07:33 AM so it doesnt turn? J-Rat 01-31-2005, 02:06 AM Carbon lock? From a failing clutch system? Thats prety odd... Autofreefindersguy 02-02-2005, 07:44 PM Is it stuck in gear? D3rELiC 02-07-2005, 07:03 PM looks like you've broke smething in the bellhousing, check out if you can remove the tranny and see in there.. lilsk8erpimp 02-10-2005, 07:01 PM have you checked the nuetral safety switch? its a rectangular like thing at the top of the clutch pedal...behind it...have someone push that all the way in and then you turn the car...it might be the switch WRC85 02-20-2005, 11:47 PM I had a similar problem, but it happened while i was driving down the freeway, i got off an exit and all the sudden i had no clutch, it still felt the same, but it wouldn't disengage. I knew i had a little problem with my master cylinder, so after much problems rebuilt that in a gas station parking lot, and bled it. the problem happened once more, but then quit, was this a fluke deal or will it return to haunt me? sorry for the long post vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|