|
|
1998 5.2 Durango Won't startD&J 01-23-2005, 11:26 AM I had my vehicle sitting for 3 weeks. Got in and started fine. I Shut it off before getting to temp, may have ran 5 seconds. I then went out to restart 3 hours later and it turned over fine but no spark or fuel. No low voltage to the coil. When looking at all the fuses, I found the 15amp Security fuse blown. Replaced the fuse, but no luck. Before I start being a change out artist, I would like to hear if anyone has had similar problems. BleedDodge 01-23-2005, 12:33 PM Why did you start it for 5 seconds and then shut it down again? D&J 01-23-2005, 02:39 PM I wanted to see if it would start, I didn't want to drive it. The vehicle had sat for three weeks with a for sale sign on it. I did plug it in this afternoon and got code 0320. Ignition / dist engine speed input circuit malf. 0443 EVAP emission control sys purge valve C 1282 Don't know the definition of this code D&J 01-23-2005, 03:15 PM Help ! cbreeze191 01-23-2005, 05:59 PM P1282 Defective Fuel Pump Relay Control Circuit, have you tried disconnecting the batt for a while to clear the computer. scottclark19 05-05-2009, 07:30 PM Same problem w/ my 98 durango. I did disconnect battery, recharged, and reconnected. Still no go. vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|