my 1995 tarus has a problem.I changed motor 3.0 95 with only 36,000 miles. I put in a remanufatured converter same specs. as original.Problem when acelerating and transmision is going to shift its very hard but if u let off aceratoryou don't get that hard shifing.what is wrong?????any help

Email : mannypr24@hotmail.com

my 1995 tarus has a problem.I changed motor 3.0 95 with only 36,000 miles. I put in a remanufatured converter same specs. as original.Problem when acelerating and transmision is going to shift its very hard but if u let off aceratoryou don't get that hard shifing.what is wrong?????any help

Email : mannypr24@hotmail.com

Check your CV Joint. Only thing I can think of, does it wobble @ 40mph?

You may have a bad speed sensor. One is by the left tire and is easy to get to but it'll be the other one on top of the trans. between the engine and the exhaust.

You may have a bad speed sensor. One is by the left tire and is easy to get to but it'll be the other one on top of the trans. between the engine and the exhaust.
hi im interested in what the outcome is on this as i have a 1997 that is doing the same thing i took it to 2 trans shops that told me i need a rebuild i dont beleive that as all other gears are fine i think there is something sticking the 1-2 shift is very harsh like a shift kit all other shifts are smooth

Check your CV Joint. Only thing I can think of, does it wobble @ 40mph?


Hi

Thanks for replying no it does not wobble at 40 mph. On the freeway its great.


Manny