Acura and radio codes(here)

Alright y'all, I can now pull up Honda and Acura radio codes. What i need is for you to post the serial number and ref number from the top of the radio, radio removal is required. Please give me 24 hours to respond and till monday if on weekends. If a mod could stickie this...

Can you get me Honda Accord radio code:
MODEL: 39100-S82-A300
S/N: 11159411
VIN: 1HGCG32721A030327

Just bought it from junkyard as an upgrade.

Thanks!
Paul

Can you get me Honda Accord radio code:
MODEL: 39100-S82-A300
S/N: 11159411
VIN: 1HGCG32721A030327

Just bought it from junkyard as an upgrade.

Thanks!
Paul

Radio code is 43143

Radio code is 43143


Thank you very much. It works!

S/N: 96G505690
Ref: CQ-JH9611A

:D

S/N: 96G505690
Ref: CQ-JH9611A

:D

Honda or acura, cause thewre are 2 different databases i have to access. Soonest i can get it is monday.

thats from my 2000 acura

I´m looking for a code for my Acura (Bose) Radio. The car is an 1994 Legend and the info on the radio is as follows:

P/N: 39100-SPO-A200-M1
REF. NUMBER: CM3929
SERIAL NUMBER: B10633997

Any help will be very appreciated

I have a 1998 Acura Integra sedan and i just got the car fixed now it needs code. Here are the numbers i got

Vin#: JH4DB766XWS003015
Ref#: CQ-JH9610A
Model#: 39100ST7A500

and this number i dont know if its the serial number or not: FA05633B

I would really appreciate it if you can help me out. Thank you in advance.

Nathan

S/N: 96G505690
Ref: CQ-JH9611A

:D

Radio code is 25216

I´m looking for a code for my Acura (Bose) Radio. The car is an 1994 Legend and the info on the radio is as follows:

P/N: 39100-SPO-A200-M1
REF. NUMBER: CM3929
SERIAL NUMBER: B10633997

Any help will be very appreciated


Radio code is 71872

I have a 1998 Acura Integra sedan and i just got the car fixed now it needs code. Here are the numbers i got

Vin#: JH4DB766XWS003015
Ref#: CQ-JH9610A
Model#: 39100ST7A500

and this number i dont know if its the serial number or not: FA05633B

I would really appreciate it if you can help me out. Thank you in advance.

Nathan

Serial number not found. Recheck serial number. I also went through to see if they entered the code when they did the pdi, but they didn't.

Radio code is 71872

Today I tried the code and it worked perfectly. THANK YOU VERY MUCH!!!

Radio code is 25216

Thanks alot it worked :D

bump :nono:

93 Civic
VIN# 1HG8552PL030681
MODEL#DEH-M7486ZH
SN# NG03636

:) WOULD APPRECIATE IT! thanks

1997 Honda Accord

Cd Player and Tape Deck Combo

On Cd Player:

Ser: M96G152592
Ref: CQ-JH1610Z

Thanks!

I am new to this forum, and I am lucky to see your help. I just bought a Honda accord 1999 , I see my dash CD player has been set a CODE. Could you please help as well ?
Thank you so very much.

VIN : 1HGCG1651XA036352

CODE 1: S84A499M

CODE 2: M98K252194

<---- I am not sure which one CODE is the right one, could
you please try both of them. I know it will take your valuable time, but please help me. Thanks again!! ----->

alright im new at this, i have a 2001 civic ex where can i find the serial number and all that so i can get the radio code? i bought it used n they just replaced the battery

thanks for the time

can you try this let me kknow what you find

u 2209 l4834 Its in an 02 civic lx thanks in advance.

Hi can someone help Please I need a code for my radio I have a 2001 Acura 3.2 TL This is all I got I think it is the serial #B00732955A Can someone HELP PLEASE :banghead: :rofl: :banghead: THANKS :icon16:

Does removing the radio entail a lot of work.
especially for someone who knows nothing about cars.
Should I bring it somewhere and have them get the serial number and other info for me?

My serial number: B10637743
ref number: CM3919

thanks!

I work in a honda parts department, and i just have to say, that if you go through the trouble of pulling out your radio to get the serial #, why wait 24 hours for turbcivic to get you a radio code that can be uptained for free within minutes through your local honda/acura dealer. Just give them the serial number (Located on the underside of the radio) and they will get you the 5 digit radio code. Its just that simple.
-Later-

To remove your radio, all you have to do is take a flathead screw driver(preferably rapped in a thin rag to prevent scratching) and pry off the garnish that surrounds the radio (and sometimes heater control). There will be anywhere between 6 and 8 clips that hold on this garnish, don't be afraid to pry, the clips are designed to withstand multiple removals, and if they do break, they are very inexpensive (but possibly hard to locate depending on model and year). When the garnish is removed, the screws will be visible(4 in all, one in each corner, sometimes 6) Once those are removed, you will be able to pull the radio out enough to flip it over and get the serial #. This number should consist of about 10 characters (Mix of #'s and letters). It's just that simple. There should be no reason that the process of removing the radio, getting the radio code, and getting your radio up and running should take more than 10 minutes. So once again, once you've obtained your serial # CALL YOUR LOCAL DEALERSHIP!!! Trust me.
-Later-

i have Acura cassette player i bought but i don't know the code for it
and also i am not sure if i will be able to provide all information. But if you can please let me know thanks

Acura
it says this on side 39100-St7-c000-A010-M1
Keh-M7336zh

Spec no. XH/CA
Serial No. OA 01716

Pioneer electronics CORP
thanks

Hi,
Can you provide the code for the following Honda Radio:

S/N: CDM2 1120 124
M/N: MU910AA
P/N: 39101S84A510M1
Thanks

You should be ashamed turbcivic, You are just throwing money away. I am a certified Acura technician, but i don't go around just giving away radio codes and what not. Customers have to pay for that service when they come into the shop, and you are just giving it away. Don't get me wrong, i will help a guy out if they ask me personally. But i don't go brodcasting free information. I hope no one in honda or acura hears about this or else it could be big trouble. Say bye bye to job. I am not trying to be a dick in any way shape or form, i am just looking out for all technicians, (we already have a bad name as it is, and you are making it harder for us to get work), and you, you could lose your job over this. I personally think this thread should get shut down. I know there is going to be a lot of those who disagree (mostly those who need a code), but if you were in my shoes as a technician for honda motor company, you would understand.