wiper relay?
mycobra70la
01-08-2005, 02:10 PM
1997 s 10 windsheild wipers work however no way to control delay and they stop where they want most times. Is there a relay to be replaced and where is it located. Thanks
movin2stereo
01-08-2005, 07:19 PM
Chances are it is the wiper circuit board.They are known for getting moisture in them and then they don't function right.Don't rule out your switch though.
boarder
01-13-2005, 07:03 AM
Try this .
unplug wiper motor. Pull the cover off of wiper motor control.(3 small screws). Remove control circuit board. Use a hairdryer to make sure board is completly dry. Reinstall making sure to reseal cover with a good flexible sealer of some kind. OR, you can just replace with a new one. HELP make one for around $25. OEM part is about $60. 99% chance that this is your problem.
unplug wiper motor. Pull the cover off of wiper motor control.(3 small screws). Remove control circuit board. Use a hairdryer to make sure board is completly dry. Reinstall making sure to reseal cover with a good flexible sealer of some kind. OR, you can just replace with a new one. HELP make one for around $25. OEM part is about $60. 99% chance that this is your problem.
rockwild
01-13-2005, 11:27 AM
It is a defective circuit board. Youcan take it out and resolder two or three spots they will look real chalky.
Automotive Network, Inc., Copyright ©2024