Page updated on 05-27-2018

Minidreams how to wild paint!PICS


minidreams_n_scale
01-01-2005, 09:05 AM
ok here you all go ! there was a post early in the week where a guy was painting his Celica , and he showed you how he didit well today i want to show you how to do it i another way,whit LOTS more color !frist off the supplies list you will need are / a flat piece of glass,2in tape [automotive works the best]a fine line ink pin [ i use a sharpe] a new # exatco nife blade, twisers ,and lets not forget an IDEA!
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/5.jpg
I also like to have some magazines on hand just to get a look at what others are tring to do and what looks good to me !
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/20.jpg
After you know where you want to take the project get some colors in mind ! on this build i wanted a lot of bright colors ,so i went with a ppg 96 honda blue,a house of colors gold , a 64 feiat red a,d then a 99 chevy truck smoke grey, Again this is all done with ppg auto paint!
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/14.jpg
for the body i am going with a corvette purple !
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/15.jpg
Ok i put all my models in primer before i paint ,it helps hide the body work and it is safe for the plastic ,and helps the paint stick,it Plastickoto,sandable primer #t235
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/8.jpg

Ok frist color you want to do are the graphic colors ,so paint the whole body the color you think you would want ,i chose the frist color to be the grey!
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/16.jpg
with the tape and the mirror you want to lay the tape on the mirrior and draw a graphic,
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/21.jpg
after you have the graphics cut out lay them on the body where you want the color to show up !remeber if you paint the whole body you can make your graphic every where !
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/24.jpg
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/22.jpg
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/23.jpg
ok after that you move on to your next color ,again you leave the tape on the model and paint the whole body!I chose the gold!
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/25.jpg
while the color is dring draw you some more graphics ,and again use the whole body to achive your wild look!
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/29.jpg
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/30.jpg
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/31.jpg
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/32.jpg
after that you move to your next color ! i chose the red!you again paint the whole body !

http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/33.jpg
draw you more graphics and apply the tape ,at this piont it looks like a big tape ball but keep going it will be worth it LOL!
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/36.jpg
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/35.jpg
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/37.jpg
ok you can try and do as many colors as you want but this is the last color for this build and i went with the blue !Paint the whole body againand draw more graphic !
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/39.jpg
add your graphics!
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/43.jpg
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/44.jpg
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/45.jpg
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/46.jpg
ok now you dont take any tape off yet , what you do now is take the color you want the body to be and paint the whole thing!i went with the purple corvette color !
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/53.jpg
ok now you let that dry for a while ! after it has set for an hour or 2 prees the tape down lightly with your hand then remove the type a layer at a time ,DONT <DONT try and take it off from the bottom layer in 1 quick move it will lift the panit and the 8 hrs you just wasted , Take the tape off and see what you got LOL!After tape is off go back with a brush and fix any thing that you see you want to overlap or has lifted ,then clear it with a light coat and let it set up ,then very very lightly wet sand it and then clear it as if you were to clear it as you other modles after that wet sand it again and polish it out and you wont have a havey lines where you had all the tape LOL!Sorry to say that a sold this kit to a member if AF about 2 yrs ago ,but i made a CD of the build and was able to share with you all Later and enjoy the new year !

http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/57.jpg
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/56.jpg
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/55.jpg
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/54.jpg
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/60.jpg

Hre are some pic of the finished model Hope you all seen what would help you if you decide to do some thing this wild LOL!

http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/71.jpg
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/72.jpg
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/73.jpg
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/74.jpg
http://img.photobucket.com/albums/v624/Davidminidreams/wildpaintacura/78.jpg

SupaMan89T
01-01-2005, 09:15 AM
that is crazy wicked sick man!!! :)

Dr.AK
01-01-2005, 09:40 AM
Nice tutorial. Even if I don't particularly like this type of paintjob, I think the technique you showed is very usefull. :)

jswillmon
01-01-2005, 10:17 AM
Hey, is that you itr?
I remember that a while back a member here was trying to sell it (probally over a year ago, i think).
He said he was selling it for someone else.
I think it's a beautiful model, but the paintjob is a little too busy for me. I think the interior, bodykit, wheels and drop top conversion are all stunning.

Btw.. welcome and thanks for the great tutorial!:wave:

SteveK2003
01-01-2005, 10:30 AM
Whoa: Flashback...

"You can do what you wanna do....in living color..." LOL

Nice work. How did the edges of the masking come out? Any sanding?

1986Z28
01-01-2005, 11:02 AM
:eek: :eek: thats crazy

ImolaEK
01-01-2005, 12:03 PM
Nice stuff! Where do you get your PPG Paints from?

minidreams_n_scale
01-01-2005, 12:46 PM
most automotive paint stores! But I am a paint by trade !so my paint comes form left overs !

Feint Motion
01-01-2005, 01:04 PM
Very Nice! Good Tutorial.

GvEman
01-01-2005, 01:05 PM
Thats Wicked!

ChopinPorkChop
01-01-2005, 01:24 PM
thats amazing i cant wait to try it n thanks for the tutorial

cpc

Vric
01-01-2005, 02:12 PM
very nice.. it's a bit "too much" but this how to show how to get great striping

phatmitsu
01-01-2005, 11:40 PM
David great to see ya posting here again.. Man i never get tired of seeing the acura... I miss her.. You will be happy to know that i did find her a great new home with lots of love..lol.. How about showing us a how to with the gel pens?? Later Rick

minidreams_n_scale
01-02-2005, 07:38 AM
i will make up a hoe to in a little while and post ,

Bas Carwash
01-02-2005, 08:59 AM
That's sick! Very nice tutorial. I definitaly got to try something like that some day! Thanks!

allparish12
01-03-2005, 11:33 AM
very nice, one of the most detailed tutorials yet!! keep up the good work!!

NOMADGAMER
01-03-2005, 08:14 PM
that looks crazy as hell, awesome

mysteryman
01-05-2005, 12:17 PM
Yeah Phatmitsu(Rick) and Dave it does have a good home I look at that car everyday...One of these days I will try it but as of right now I'm trying to get GEL PENS to work....lol Do a write up.....On another not I also have another car from Dave from the early days and it is awesome to...

Rob

tonioseven
01-05-2005, 12:22 PM
That was cool!! :eek:

SkylineMan32
01-23-2005, 10:37 AM
What was the point of the mirror? I want to try this but I don't grasp the whole concept. Yes and do a gelpen tutorial

minidreams_n_scale
01-23-2005, 11:49 AM
i use a mirrior , you can use glass ,the prupose is so that you can lay the tape down draw on it ,cut it out and then left it off and place on the model , the rest of the thing i try to use the tape would come back off or it would lose its sticky ,So thats the purpose of the mirrior or glass!

Porsche Carrera
01-23-2005, 12:17 PM
great how to! :grinyes:

Add your comment to this topic!