Our Community is 940,000 Strong. Join Us.


1990 Blazer barely moves


mclowejr
12-20-2004, 06:41 PM
Hello, I have a 1990 Chevy Blazer that up until recently was running well. A few days ago I got in, put it in gear and the engine revs up really high, but only inches forward or backward. I'm concerned about the torque converter. Does this sound accurate? Any other possibilities I should consider? Any advice would be appreciated. Thanks.

Mikado14
12-20-2004, 06:43 PM
First, Have you checked your fluid level?

93_R/T_TT_Stealth
12-20-2004, 08:03 PM
unplug the TCC an try it again

BlazerLT
12-21-2004, 12:41 AM
Check the fluid level.

mclowejr
12-21-2004, 01:30 PM
Sorry, forgot to mention that the fluid level is ok. That was my first thought; unfortunately, it didn't pan out.

BlazerLT
12-21-2004, 03:43 PM
Just to make sure, you checked the level with the truck hot idling in park right?

mclowejr
12-21-2004, 09:30 PM
Yep, it's right on the mark.

mclowejr
12-21-2004, 09:38 PM
unplug the TCC an try it again
How would one go about unplugging the transmission converter clutch? I'm fairly proficient with mechanics, but my transmission knowledge is somewhat limited. Thanks.

BlazerLT
12-21-2004, 10:18 PM
Do you have the check light on?

mclowejr
12-22-2004, 12:02 PM
No, the check engine light has not come on. There are no warning lights on. Of the few guages I do have, the temp. and voltage are ok.

BlazerLT
12-22-2004, 12:38 PM
Hmmm........

Sounds like a torque convertor or the tranny has bit the dust.

Oh, your tranny is vacuum operated.

Check for broken, split vacuum lines going to and from the transmission.

Sounds like a vacuum line fell off.

highlift
12-26-2004, 09:21 AM
Hello me and my son are working on his 1990 4x4 full size blazer. And the same thing thing happened to his. When we went to check the tranny fuild it had some metal shavings on it. So we knew it's biting the dust. We also now have another problem. So if you can answer this ? It seems that when her takes it out it wont go past 45 mph. and there seems to be a miss in it. the check engine light came on, so we put it on the tester and it said it was the o2 and we reset it. then a week went by then it came on again and then said it was the knock sensor. so we cahged that!! and now its acting up again so we placed it on the tester again and now it does not say anything. so we thought it might be the fuel filter so we changed that. And it's doing it again. and the service engine light comes on, the next thing is checking the distributor cap. do you have any suggestions.

mclowejr
12-29-2004, 07:04 PM
Just a bit of follow up about my Blazer. After looking at it more, it seems that the transmission itself has bit the dust. Unfortunate considering it was just rebuilt 25,000 miles ago.

Thanks for the suggestions.

BlazerLT
01-01-2005, 09:14 AM
Should have a warranty bro, I think you should persue it.

Add your comment to this topic!