Wanted:

I need engine parts. looking for a set of 64-66 289 heads-and 69-70 351w heads. Also, good rods from a 351w pickup motor. And, (not done yet) an Autolite 2100 series 2bbl carb with the numbers 1.31 or 1.33 or 1.23 located on left side of float bowl.

Help me beat the chev'ys with these parts at a reasonable price. :thefinger

Time

I have a set of 289 heads. Depending on whether you need Crane springs, locks, and retainers will determine price. They have a fresh valve job.

I need engine parts. looking for a set of 64-66 289 heads-and 69-70 351w heads. Also, good rods from a 351w pickup motor. And, (not done yet) an Autolite 2100 series 2bbl carb with the numbers 1.31 or 1.33 or 1.23 located on left side of float bowl.

Help me beat the chev'ys with these parts at a reasonable price. :thefinger

Time
For a used carburetor, go to Ebay Motors then click on "Parts and Accessories" then type in carburetors in the search window there.
I found several MC 2100 and MC 2300 used carbs there.
How much CFM do you need? The 2300 will pass 350 CFM. Don`t over carb the engine. Use a formula to figure the required CFM for your engine. Do you need manual or electric choke?
I have an old Ford engine manual that gives all kinds of info relative to parts interchangeability and hop up info.
Please LMK if I can look up something for you.
An old Ford guy from way back.