Im sellin a turbo kit for a 240 sx ka24de motor. ITs a t3/t4oE hybrid with spearco intercooler 23x9x3 and the Turbo manifold. Turbonetics evolution wastegate , walbro 255lph fuel pump, 370CC injectors with rail, turbo gaskets,boost gauge, air fuel gauge, gauge pod. 1st gen dsm Blowoff valve and im throwing in a apexi Super afc II the newest one for fuel management.
2,000 new kit.
Going with a bigger setup
The kit was never installed.

any pictures?what trim is the compressor?what A/R on turbine?what manifold is it?and would you be willing to part it out?

T3/T40E
3" Inlet Diameter
2" Outlet
.57T Compressor Wheel
.50 A/R Compressor
.63 A/R Turbine
Thats the specs on the turbo. i will not part because im using money i get from this plus what i have for a bigger set up with engine internals included in kit.

Specs for intercooler:
Spearco Front Mount Intercooler

17"x8"x3" Bar & Plate Core
23.5” x 8” x 3” from endtank to endtank
2.5” Inlet & Outlet’s

Damn not a bad price at all. You are looking to get $2000 right

yup.

where you located and do you have pics?....this might make me keep my car lol

edit: also how much boost can the intercooler handle? And does it come with the oil lines, coolant lines, and downpipe/dump pipe?

everything above is what consists of the kit. as for the intercooler its good for 500 hp and the turbo can make 450 whp.

Im sellin a turbo kit for a 240 sx ka24de motor. ITs a t3/t4oE hybrid with spearco intercooler 23x9x3 and the Turbo manifold. Turbonetics evolution wastegate , walbro 255lph fuel pump, 370CC injectors with rail, turbo gaskets,boost gauge, air fuel gauge, gauge pod. 1st gen dsm Blowoff valve and im throwing in a apexi Super afc II the newest one for fuel management.
2,000 new kit.
Going with a bigger setup
The kit was never installed.

You should just get some good pics, then put the turbo kit on ebay... then give us the link from ebay and let the bidding begin or just have a buy it price of $2,000 like you want. This way it will be a safe transaction.

Now about the turbo, i have a question. Why are you going with a bigger turbo? Do you want more Top End power or you just have tons of HP? that t3/t4 cant handle? from what i know, the t3 with t4 compressor wheel can handle 250-550 hp, if you want to go bigger to like the t04 then its like 300-700hp for the original set up... do you have that much HP? just curious why it is you want a bigger set up...

Im going with a stage 3 kit which comes with bigger injectors, better engine management and piston and rods. :)

Im going with a stage 3 kit which comes with bigger injectors, better engine management and piston and rods. :)

oh nice :)

where are you located? I might have the money this weekend.

hes in miami florida....