Please can somebody advise me on how I can go about spraying my engine block cover without causing any harm?

Obviously I have got to remove all leads and stuff, but (not being particularly knowledgable in the mechanics front) can i take the cover off myself with no risks? or shall I just remove the sparks and be careful? If the latter, I would need to block the sparks holes to prevent spillages into the block wouldnt I?

or would I be better leaving a proffessional to do it?

sorry about all the questions :eek7:......Jim

You don't even need to remove the spark plugs to remove the valve cover. Just bear in mind that you might have to replace the gasket(s) - the main one and the ones in every spark plug well. You'll also need silicone sealant for when you reinstall the valve cover.

I would recommend having the valve cover powedercoated instead of spraying it - looks better and is much more durable. Call around, see what the price might be, and take the valve cover to them, at least that's what I'd do.

Found this page - the steps at the beginning and at the end are the relevant ones for this case. Clicky! (http://www.nissanperformancemag.com/january02/cam-install.shtml)

Cheers geeza.........i studied that link and have decided that, along with my engine expertize *ahem* I will take a trip to my local garage instead!! LOL.

Thanks for the input anyway, im sure its easy when you know how :sly:

Cheers.....Jim