318 wedge ?

ok, this gets more looks then the plymouth post, so here it looks, i have a c-body(fury) with a 318 wedge motor, two bolts on the valvecover, i was wondering, since the block looks the same as my 383, will have have to change moter mounts. my motor is pre 1967, if that is any help

You mean a poly 318? Not wedge.

yes, my bad, the 350/413/426s are wedge motors,mine is a poly, but i have also heard it refured to as a b/b, i dont know much about this motor, execpt for the fact that i have a 383 and a 413 that want to be put into this car, lol:-D

that 318 is call a wide block. mainly makes a good boat anchor. Not sure what year car your working on but with my 64 the only difference is the upper metal mount.

Got any pictures of this motor?

not off hand i dont, hell, go tp ebay, and look for any car made before 1967(58-66) and you will find the motor. so all i need to do is swap metal mounts:-D yay

That's not good enough. Many of them look different. It might not even be a 318...

i know its a 318, on my car atleast, its a #'s matching car, that i know its a small block, due to the fact that the distribitor is in the back, and also the block is too wide to be a 273, and, the 340 wasnt around yet. you can still find pic of this motor on the internet

I have one of the rare 318-poly six-pack intake and carbs if you want to make a offer.

350 for all sound good?

Im looking for some input on a 318 wedge motor..........Im rodding a 33 dodge 4 dor sedan .... I picked up a 318 out of a 1990 dodge truck....I also have acess to a 1969 wedge 318 which one would be the best motor to install in my 33......I do not want to put a brain in it to run....Im going for cruising and or long distance traveling....I still would like to have alittle thump to it but something that has "not bad fuel mileage". Im more into the cruising than burning my tires off.......so to speak...