Custom Exhaust System
badlanz
08-04-2004, 04:16 PM
Does anyone know where I could find a complete bolt-on custom exhaust system from the manifolds back in either 2 1/2 to 3 inch pipe size? I have the old body style with the factory dual cat system going into a muffler with one output tailpipe. This exhaust system is a piece of __it! I know there are a lot of custome shops willing to install a system, but that gets pricy.
Please give me any links if you can.
Thanks.
Please give me any links if you can.
Thanks.
Vroom2
08-05-2004, 12:56 PM
There are a number of complete cat-back systems out there from Flowmaster, Magnaflow, Gibson, Bora, Corsa, etc. However, I found them to actually be more expensive than a custom-bent system utilizing a Flowmaster. I recommend chatting with a local exhaust shop or two...
Take care,
Jerry
Take care,
Jerry
badlanz
08-05-2004, 03:05 PM
Your probably right. Due to the dumb location of the fuel tank, and the tiny pipes coming off the manifolds going to the cats, it would be totally necessary to drop the entire exhaust system and start over. Strange why GM didn't run a single 2 1/2 or 3 inch exhuast all the way to the tailpipe. I mean, when new it was $40,000. what's a little extra for a premium exhaust system. The new Yukon Denali's have the same pipe system they should have installed on the '99's. Thanks!
Automotive Network, Inc., Copyright ©2024