Hello all. Just wondering if anyone out there has programming instructions for keyless entry unit on a 1991 Bonneville SSE?

Thanks

Turn Ignition Switch to OFF. Jumper Program Connector terminal A (PPL/WHT) to terminal B (BLK/WHT). Door locks will lock and unlock in approximately 2 seconds. Press Unlock Button on one Transmitter. Door locks will lock and unlock in approximately 2 seconds. The first Transmitter is now programmed. Repeat step 3 using other Transmitter. If only one Transmitter is being used, go to step 5. Disconnect jumper from Program Connector.The Program Connector is clipped to the metal support that is seen on the left side of the glove box opening.

Thanks for the help!!!