1999 Ram o2 sensor change
glastron
07-13-2004, 02:10 PM
Does anybody know the complexity in changing out the 02 sensor on this pickup? Are there any special tools required?
Thank you for your input
Thank you for your input
BleedDodge
07-13-2004, 05:18 PM
You need like a 7/8 or 15/16 wrench, or even a crescent wrench will do, that's what I used. Put the wrench on the sensor and turn it out. There is a plug on the other end, so unplug it. Put the new one in it's place. It's so easy.
BuzLtYr321
07-31-2004, 09:22 AM
There are two o2 sensors, about$60 each. I'd replace both at the same time...they aren't that hard to do.
Does anyone know where I can find the Coolant Sensor? Sometimes a faulty coolant sensor will send a bad code like O2 sensor and will cause rough idle. THe closed loop system will not close after engine is warm. I have a 99 1500 4x4 with 360 V8
Does anyone know where I can find the Coolant Sensor? Sometimes a faulty coolant sensor will send a bad code like O2 sensor and will cause rough idle. THe closed loop system will not close after engine is warm. I have a 99 1500 4x4 with 360 V8
BleedDodge
08-02-2004, 01:47 PM
BuzLtyr321, I replied to the PM you sent me.
Automotive Network, Inc., Copyright ©2024