2001 GMC Jimmy Keyless Entry


peabodybutz
06-27-2004, 03:31 PM
i have a 2001 gmc jimmy and it only came with one keyless remote and i got another one, used off e-bay, and wondered if anyone could help me program it or tell me how to.

cruit469
07-07-2004, 12:13 PM
I used this method after going through the same thing. It worked for me.

Transmitter Programming:

1)With the driver door closed, hold down the power unlock button on the door panel.

2)Turn the ignition switch to the ON position

3)Turn the ignition switch to the OFF position

4)Turn the ignition switch to the ON position

5)Turn the ignition switch to the OFF position

6)Release the power unlock button on the door panel.
The remote control door lock reciever will respond in the following manner in order to indicate that the receiver is in the programming mode:

6.1)Locking the doors

6.2)Unlocking the doors

IMPORTANT:
All extra transmitters must be programmed at this time. When a new transmitter is programmed it will deactivate the old transmitters.

7)Hold down the lock and unlock buttons on the transmitter until the remote control door lock reciever will respond in the following manner:

7.1)Locking the doors

7.2)Unlocking the doors

8)Repeat step 7 for each additional transmitter

9) Turn the ignition switch to the ON position in order to exit the transmitter programming mode.

Add your comment to this topic!