86 CRX parts for sale, CHEAP.
NON-SI, drivers door complete, Hood (small dent on corner), headlights, both door panels, hatch w/ glass, tail lights & assorted interior parts.
Complete SI head 100K when rings went. bare block. maybe more, ask and I'll check. car was stripped in 95 or 96. need to get this stuff out before we move. new here but vette forum member (twisted99) since November & Ebay (626buffy) since 2000.

Where are you located and what do you want for the Si head?

Where are you located and what do you want for the Si head?
NY, about an hour from NYC. $50 & shipping. Give me you zip and I'll get a shipping charge.

what you want for the head lights?? I live in puerto rico...00953 (my zip code)....

im interested in that si head (95206)

are you selling the header panel hhmmmm

do you have any other parts? I need the brackets for the clutch cable (if this is mtx) ...take a look at this picture...
http://www.redpepperracing.com/gallery/the_one/aap
That would be so awesome if you had them. I also need some other parts. Lemme know if you have the interior too, thanks!!!

There are two more mounting brackets where the cable meets the firewall...
http://www.redpepperracing.com/gallery/the_one/aan?full=1

Parts needed
-------------
Heat shield for the exhaust
Dimmer for interior lights
Starter bolts
Door panel screws
Plastic snaps for door panel

additional
-------------------------
Headlights? (if they look like this...) http://www.redpepperracing.com/gallery/the_one/aaa
Ball on top of the shifter (or the whole thing)
Catalytic converter (if it works)

what you want for the head lights?? I live in puerto rico...00953 (my zip code)....

I'm thinking $50 for both, let me look into shipping charges tomorrow at work.

im interested in that si head (95206)

I'll weight & get rate tomorrow...sorry don't have the header panel.

There are two more mounting brackets where the cable meets the firewall...
http://www.redpepperracing.com/gallery/the_one/aan?full=1

Parts needed
-------------
Heat shield for the exhaust
Dimmer for interior lights
Starter bolts
Door panel screws
Plastic snaps for door panel

additional
-------------------------
Headlights? (if they look like this...) http://www.redpepperracing.com/gallery/the_one/aaa
Ball on top of the shifter (or the whole thing)
Catalytic converter (if it works)

Yawbo,
headlights look like that, The car was an 86 HF, and i belive they are the same as the SI.
I might have the dimmer but no go on the rest, sorry

head lighead lights...head lights..head lights...head lights.......please...

head lighead lights...head lights..head lights...head lights.......please...

$100 shipped

Price for the passenger side or both tail lights zip 77346? HF right?

I am interested in a front bumper turn signal. How much would you want for the housing and wires connected to it?

how much would you sell the pedal bracket for?

Sorry I have not got back sooner, no time at work to Box & weigh this stuff, anyway shipping rates are:

head $50 to 95206 $30 = $80
headlights $50 to 00953 $35 = $85
taillights $25 to 77346 $10 = $35

1 tailight is cracked but not broken

Other parts asked about in this thread I do not have.

here is a list of what I do have:
Hood, hatch, pass. door, side mirrors, dash cluster, motor mounts, turn sig. stalk, dash cubby (?),clock, ign.switch w/ key, both door panels, oil pan, valve cover, bare block. & headlights, taillights & cyl. head listed above.

ANY offers?
If I dont sell this stuff soon it's going to the junk yard

sorry to reply so late... i am intrested in the head lights but im low on cash ....4 now....... how would i be paying you....c.o.d. or money order?????

how about the engine and tranny

do you have the arm that connects the windshield wipers?

do you have the arm that connects the windshield wipers?

Sorry, I don't.

I've already started junking some of the many parts I have, Honda, Toyota & Datsun Z. If you need anything LMK. CHEAP!
It's ALL gotta go one way or another.

Still have for CRX: drivers door, hood, SI head. both headlights & taillights, Gauge cluster and both door panels.

How much for the Si Head? I figure I might as well keep a back-up...

How much for the window regulator - and crank (driver door)?
Also, do you have the plastic trim pieces on the outside?

$40 for the head + shipping

Not sure what trim piece you need, as for the regulator, $20 + shipping

Sorry to take so long getting back...What would that come to, shipping the window regulator & crank, to 76205?

The pic (http://webpages.charter.net/yaw.bonsu/images/c-rex/outside.jpg) shows the side of the car, and where next to where the trim is gray its broken; I was wondering if you had this piece...

Listed on EBAY here:
http://motors.search.ebay.com/_W0QQgotopageZ1QQsassZ626buffyQQsosortorderZ1QQsos ortpropertyZ1

will the 86 crx bumpers fit on a 87 hatchback?

yes they will

do you still have the dash cubby and if so how much to get it shipped to 98225?

Sent you an email...........

ok see i need an odd part, the bumper supports that hold the rear metal bumper to the car. im rebulding a 87 hatch back and other than that i need some glass for it but i know that the crx glass wont fit

KRISSMITHROCKS
Yes I have the dash cubby. How's $20 shipped?

VASHCIVIC
No. I don't have any of the bumper parts.

TXTONY7
I responded to your email

I also have the following items not yet listed on Ebay:

The gauge cluster (clear plastic is broken 113K on odom.)
Complete cylinder head
Rear hatch with glass

Would you have a working speedometer cable?

do you have Paypal?

do you have Paypal?

Yes.

626buffy@optonline.net

i dont know if u can use nething from my civic but if so just let me know

HI
It's been awhile since you posted this but I'm hoping for an item you may have. I need the hatch struts. Do you have them or is the parts gone for everthing.

HI
It's been awhile since you posted this but I'm hoping for an item you may have. I need the hatch struts. Do you have them or is the parts gone for everthing.

I know I have the hatch, not sure if the struts are on it, I will check over the weekend & let you know.