Check Engine Oil Light
ez2bgman
05-18-2004, 03:49 PM
Can anyone please help me and tell me how to reset ym "Check Engine Oil" light on my '01 Yukon XL. I lost my freakin manual and forgot how to do it. Thanks.
socal01denali
05-18-2004, 06:57 PM
turn ignition to RUN position with engine off.
fully press and release the gas pedal 3 times within 5 seconds.
if the CHANGE ENGINE OIL message flashes for 5 seconds the system is reset
fully press and release the gas pedal 3 times within 5 seconds.
if the CHANGE ENGINE OIL message flashes for 5 seconds the system is reset
or_netboy
07-01-2004, 03:00 PM
I have an 02 Yukon- (just got it)
I changed th eoil myself less than 2000 miles ago and recieved the same indicator lamp- I tried doing the above steps and can't seem to reset the indicator- please advise- am I missing a step?
When i set the ignition in the run position the first lamp i get is the battery lamp- then about 10 seconds later the change oil lamp comes on-
Any help is appreciated
I changed th eoil myself less than 2000 miles ago and recieved the same indicator lamp- I tried doing the above steps and can't seem to reset the indicator- please advise- am I missing a step?
When i set the ignition in the run position the first lamp i get is the battery lamp- then about 10 seconds later the change oil lamp comes on-
Any help is appreciated
Automotive Network, Inc., Copyright ©2024