Our Community is 940,000 Strong. Join Us.


door pad removal


dumbfix
05-12-2004, 08:41 PM
2000 yukon needs door pad removed . Heelp! Fast!!

GMCTech
05-13-2004, 05:55 PM
Easy, easy, easy!! :bigthumb:

remove the door lock bezel, the door handle bezel. and the small piece of corner trim by the upper front corner of the door panel.

Pry easily on the door lock control panel, unplug all electrical connectors (if any).

There are two screws to remove - either both under door pull or one under door pull and one behind the door lock pad that you just removed. _ Should be 7mm heads.

Lift up on entire door panel, and unhook from door - don't pull away yet. - Reach down and pull door light out of bottom of door. and disconnect the door speaker (if equipped).

VOILA!! :thumbsup:


Hope this helps.

Add your comment to this topic!