Our Community is 940,000 Strong. Join Us.


gauge problem


tonybu
04-24-2004, 04:12 PM
i have an '98 jimmy and about a week ago the tach and speedometer started to flucuate and evetualy stopped working. i saw the earlier post about the ignition switch and it sounds like the same problem. on start up the tach will jump then go out also the gas hand wont work but the oil pres. and batt work. it also wont alow the key to come out without coaxing. the strangest thing is when i push the trip odometer all gauges work fine.also the trans is not shifting. any help will be wonderful as i said before it souns like the early post of a bad ing. switch

sorry for such a long post.

michelq
04-25-2004, 08:55 AM
it is bad ign switch

tonybu
04-25-2004, 10:44 PM
thanks the ign. switch at sixty bucks is better than 300 for a guage cluster

michelq
04-26-2004, 05:20 PM
good for you!

tonybu
05-07-2004, 08:48 PM
changed the switch good as new. i would have never thought of that thanks for the info.

stargehzer
07-22-2005, 04:16 PM
thanks the ign. switch at sixty bucks is better than 300 for a guage cluster
Where did you fing an ignition switch for $60 ?? I haven't been able to find one for less than about $90 and money is tight right now. Thanks in advance!!

tonybu
07-22-2005, 08:04 PM
check the autozone website its listed for 45.99

Add your comment to this topic!