Painting rear lights
jberry3
04-16-2004, 01:29 PM
Being a newbie I would like to know what paint you guys use to colour the rear lights and other lights that require colour on your kits. Do i need a spray can or can it be done with a brush as they are small parts.
Thanks
Thanks
Renegade
04-16-2004, 01:35 PM
I did it with a brush. I use Testor turn signal clear red met. aor turn signal clear orange met. But that's the only colors I can get in my coutry besides Revell.
BlueHand
04-16-2004, 02:00 PM
Welcome! with the clear parts, I use Humbrol clear red and orange, all applied by a fine brush, building up a few layers to get a solid clear.
jberry3
04-16-2004, 02:03 PM
Thanks what type of paint is it. Is it acrylic or enamal?
Renegade
04-16-2004, 02:39 PM
Ooops, jberry3 - Welcome on AF! :)
I use enamel, becouse I can't get acryls over here.
But a lot of people suggest that painting with acryls is more simple.
Basicly it depends on the habbit of your previus 'paintings'. ;)
I use enamel, becouse I can't get acryls over here.
But a lot of people suggest that painting with acryls is more simple.
Basicly it depends on the habbit of your previus 'paintings'. ;)
Mustangman25
04-16-2004, 02:57 PM
Tamiya's clear arcryllics (in bottles) also work well for painting lights. I just brush it on and it works fine. http://www.tamiyausa.com/product/paints/images/acrylic_chart.jpg (#'s 19-27)
mike@af
04-16-2004, 03:08 PM
Welcome to AF!
I airbrush my taillights. I use Tamiya's clear colors (acrylics).
I airbrush my taillights. I use Tamiya's clear colors (acrylics).
BlueHand
04-16-2004, 03:12 PM
The Humbrol paints are acrylic, I prefer them as the solid colour comes with less coats. i can't get Tamiya colours from LHS, so I have to live with what they have..
Inservible
04-16-2004, 03:21 PM
GTMike!
Do you paint them from both sides or just from one???
Do you paint them from both sides or just from one???
mike@af
04-16-2004, 03:24 PM
GTMike!
Do you paint them from both sides or just from one???
Just the back side.
Do you paint them from both sides or just from one???
Just the back side.
Verminator
04-16-2004, 03:32 PM
I tend to paint both sides it gives a better depth of colour and speeds up the process as you only paint once.
Renegade
04-17-2004, 05:13 AM
I paint just the back side.
It also depends what kind of a lights do you want eg. lexus style.
It also depends what kind of a lights do you want eg. lexus style.
Leon L
04-17-2004, 08:32 AM
I just paint the back side of the light lens with Tamiya clear. Normally put on about 3 or 4 coats to build up a nice deep colour, then spray the exterior surfaces with clear lacquer for a really good shine.
Vric
04-17-2004, 08:48 AM
I use Tamiya Clear red and Chrome Bare Metal Foil
Automotive Network, Inc., Copyright ©2024