Hey whats going on everybody... i am putting in a aftermarket gauge cluster.. trying to find the wire for the head lights.. if there is anybody that know were the wires are under the dash for a 95 GS-T Eclipse plz e-mail me back at clc0284@hotmail.com... or if u have any sites..

http://www.vfaq.com/mods/wiring-gen2wir.html

Use the parking lights, If I remember correctly when I installed them I tapped them to the headlights first and when you turn the high-beams on the gauges go off.
Then I tapped it to the parking lights and it solved the problems. Good luck

For gauge faces all you need is a 12V and a ground. two wires. I used the 12V wire that ran to my cigarette lighter because it has a light around the bottom. the green/white is the 12V and the black/yellow is ground if you want to use the wire to ground or either a screw. It has the most room to splice into the wire and wire the gauges. Just my two cents ;)