Gauge Cluster
gene_sun
03-05-2004, 03:57 PM
I have a 2004 Yukon SLT 4wd, and I do not really like the stock gauge come with it. I really like the white lights and needles in the Escalade gauge cluster, I am thinking of buying and swap it out. The only thing I can find online is 2003 Escalade gauge cluster (GM parts # 15182142) for $240. I can not find 2004 model.
So, has anyone done this before? Would a 2003 escalade gauge cluster work with 2004 Yukon?
So, has anyone done this before? Would a 2003 escalade gauge cluster work with 2004 Yukon?
wtb1455
03-06-2004, 06:50 AM
Gene, Not sure about your years but I think so, I put a Escalade cluster in my 2000 and I love it. I had a bonded local speed shop set the mileage when installed. The local GMC dealer said they actually used them. Check Ebay sellers Fleet auto1 and Pt King. I have used them and they are Gm dealers and can answer your queston on thre specific years.
Yukonuba
03-09-2004, 10:12 PM
Check out this link to a instrument cluster on ebay...according to the seller, it fits '03-'04
Yukonuba
03-09-2004, 10:13 PM
Guess it didn't like my hotlink...
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2465197886&category=33675
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2465197886&category=33675
gene_sun
03-10-2004, 02:06 AM
Hey yukonuba,
Thanks, I went to ebay, and saw this one is the cheapest:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2464532331&category=33675
You this this one will work?
Thanks, I went to ebay, and saw this one is the cheapest:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2464532331&category=33675
You this this one will work?
D A S
03-10-2004, 06:22 PM
2003 & 2004 are the same (interchangeable), 2002 and older are different.
Yukonuba
03-10-2004, 07:58 PM
2003 & 2004 are the same (interchangeable), 2002 and older are different.
Like he said...the one on ebay will fit. I just installed a Denali cluster in my Yukon an hour ago...REALLY simple.
1. Have your new cluster programmed with VIN & current mileage. I had mine done at Speed-O-Tach in Concord, CA (http://www.sotelectronics.com/) for just $45 and 30 minutes of my time.
2. Disconnect negative battery cable.
3. Tilt steering wheel & put trans gear selector into lowest position.
4. Remove dash bezel. The bezel is held in place with spring clips around the perimeter. Remove the ashtray and start there, working your way around.
5. Remove four 7mm screws that mount the instrument cluster.
6. Lift cluster out and unplug the connector at the top.
7. Reverse instructions for installation of new cluster.
Simple!
Like he said...the one on ebay will fit. I just installed a Denali cluster in my Yukon an hour ago...REALLY simple.
1. Have your new cluster programmed with VIN & current mileage. I had mine done at Speed-O-Tach in Concord, CA (http://www.sotelectronics.com/) for just $45 and 30 minutes of my time.
2. Disconnect negative battery cable.
3. Tilt steering wheel & put trans gear selector into lowest position.
4. Remove dash bezel. The bezel is held in place with spring clips around the perimeter. Remove the ashtray and start there, working your way around.
5. Remove four 7mm screws that mount the instrument cluster.
6. Lift cluster out and unplug the connector at the top.
7. Reverse instructions for installation of new cluster.
Simple!
jaycough
04-25-2004, 07:51 PM
2003 & 2004 are the same (interchangeable), 2002 and older are different.
does the computer, driver information sysyem still work(mpg, fuel economy, , etc...)
does the computer, driver information sysyem still work(mpg, fuel economy, , etc...)
Yukonuba
04-25-2004, 08:32 PM
does the computer, driver information sysyem still work(mpg, fuel economy, , etc...)
My vehicle doesn't hav ethe driveing computer, but I am sure that it would not change any functionality.
My vehicle doesn't hav ethe driveing computer, but I am sure that it would not change any functionality.
D A S
04-26-2004, 08:19 PM
Yes, the driver information center works the same as before.
Vroom2
04-27-2004, 12:08 AM
I admit to installing two clusters in my '03 - first the standard Escalade and now the platinum version. Great how-to by Yukonuba. Kind of funny - I just posted directions on another forum as well.
Speed-o-Tach is flat-out awesome. Great folks. They're selling the platinum cluster for $260 w/ calibration. Keep that in mind folks - if you don't get it calibrated, and have the receipt signed off by the vendor - you're asking for trouble with any warranty related work.
This is a great mod - not too expensive and it's something you can smile about every time you're behind the wheel. Just to follow up: clusters are distinguished as 00-02 and 03-current model years. The 03 and up use the DIC and are not interchangeable on older models. All functionality is retained, and it's a simple 10 minute swap.
Take care,
Jerry
Speed-o-Tach is flat-out awesome. Great folks. They're selling the platinum cluster for $260 w/ calibration. Keep that in mind folks - if you don't get it calibrated, and have the receipt signed off by the vendor - you're asking for trouble with any warranty related work.
This is a great mod - not too expensive and it's something you can smile about every time you're behind the wheel. Just to follow up: clusters are distinguished as 00-02 and 03-current model years. The 03 and up use the DIC and are not interchangeable on older models. All functionality is retained, and it's a simple 10 minute swap.
Take care,
Jerry
AgentOrange
05-22-2004, 10:50 AM
I just got my '04 Escalade Platinum Cluster from Speed-o-tach and they were great to work with. My Denali is brand new so all they needed was my VIN. Got it for $220 + $10 for 2nd day shipping. If you need one call Speed-o-tach At 925-691-4090 and talk with Cliff @ x531, he will set you up.
Warning - Be careful with the units on Ebay, you never know what you're going to get.
Later,
AO
Warning - Be careful with the units on Ebay, you never know what you're going to get.
Later,
AO
gene_sun
07-29-2004, 11:45 AM
Got a question for all the mechanics on this board.
One of my buddies just told me that on all Yukons, the mileage is only stored within the gauge cluster, not in the main onboard computer. Is this true?
One of my buddies just told me that on all Yukons, the mileage is only stored within the gauge cluster, not in the main onboard computer. Is this true?
AgentOrange
07-29-2004, 11:57 AM
Yes, it is true. The mileage and hour meter info are stored in the cluster itself, not the computer. This is why you need to give the mileage and hours along with your VIN # to Speed-o-Tach when you order the cluster so they can program the new one.
gene_sun
07-29-2004, 01:33 PM
thx agentorange,
Doesn't this create a loophole for people to play around the mileage of a given car?
For example, if a person buys a extra gauge cluster and swap between those two clusters every six month. When he is ready to sale the car, he puts in the orginal cluster with only the half "used" miles.
Am I crazy to think like this? Just curous.
Doesn't this create a loophole for people to play around the mileage of a given car?
For example, if a person buys a extra gauge cluster and swap between those two clusters every six month. When he is ready to sale the car, he puts in the orginal cluster with only the half "used" miles.
Am I crazy to think like this? Just curous.
AgentOrange
07-29-2004, 01:56 PM
You are correct. The only catch is when you buy a unit from Speed-o-tach they program in the current mileage and it is entered in the GM system that it has been replaced and updated. When I called to get my unit, he knew exactly where and when I bought the truck after I gave him the VIN#. I still have my new unit with 315 miles on it that could be installed in a few years and the truck would have 20-30K less miles on it but I'm one of the honest guys around and wouldn't even attempt it.
tonytone
07-30-2004, 11:42 AM
Yes, it is true. The mileage and hour meter info are stored in the cluster itself, not the computer. This is why you need to give the mileage and hours along with your VIN # to Speed-o-Tach when you order the cluster so they can program the new one.
Interesting...I thought I read somewhere that on the NBS GM trucks/SUVs the odometer info is also stored in several other locations as well... :confused:
Interesting...I thought I read somewhere that on the NBS GM trucks/SUVs the odometer info is also stored in several other locations as well... :confused:
Automotive Network, Inc., Copyright ©2024