32's on stock rims?
jasonja
02-26-2004, 07:59 PM
Does anyone know if you can run 32 inch tires on the stock 15 inch tacoma alloy rims with no rubbing? I am looking to get new BFG MT's in 32x11.50x15... Any help on this question will be much appreciated.
'03DC3.4TRD4X4
03-01-2004, 03:35 PM
they will rub off road for sure.
redtoy92
03-04-2004, 01:35 AM
they will rub off road for sure.
he is more then right! you can run those tires on the stock wheels with no problem but with out a lift you will rub on full turns and off road. red
he is more then right! you can run those tires on the stock wheels with no problem but with out a lift you will rub on full turns and off road. red
Lonestar39
05-06-2004, 11:56 AM
What is the minimum lift needed to handle 32's on the stock 15 X 7's (2000 4x4 ext cab)? Is there any hammering, grinding on something that would alleviate some of the rub without compromising safety or escalate wear? Looking for a cheap way to get 32's on mine with very minimul rub. I do very little off-roading that is hard on the vehicle.
Thanks!
Thanks!
nickbo
05-12-2004, 01:51 PM
you will need at least a 2" lift, 2.5 just to be safe. you could run 33's with a 3" lift too
dfskinner
05-17-2004, 12:54 PM
The stock rims are 15x7, can you put a 12.5" wide tire on a stock rim?
tacolover
06-15-2004, 04:36 AM
i have a '02 4wd taco with a Fabtech 3" lift on 15x8 rims with 32x11.50 bfg mt's and they rub on a full turn. It can be fixed with minor trimming. all you need is a razorblade.
jonb_24
06-15-2004, 01:01 PM
tacolover,
do you like the fabtech lift. how does it handle. noticed any excessive wear. where did you get it and how much.
thanks
jonb_24@hotmail.com
do you like the fabtech lift. how does it handle. noticed any excessive wear. where did you get it and how much.
thanks
jonb_24@hotmail.com
Automotive Network, Inc., Copyright ©2024