i was wandering what type of ecu i have?
i am going to be swapping in a d15 b from h motors online and was wander ing if i can use my ecu or if i have to get a different one. also this engine is obd 1 mine is obd2 will that make a difference? :banghead:

Probably a P2P ODB2a ECU. Also, why in the world would you go from a 1.6 to a 1.5? There are conversion harness's for ODB2 to ODB1. Most logical thing would be to get D16Y8 and drop it in with no problems.

jdm d15b is a good choice. its got more hp than a z6 and a real nice r/s ratio for a d series. also im pretty sure its got a stock lsd. you will prolly need a new ecu. yours is located on the passenger side under the carpet on the floor. the 3 digits in the middle of the #'s are your ecu code.

to put this swap in without a check engine light,you're gonna need the d15b ecu which is the p08,and an obd 2 adapter,otherwise you will have a check engine light because there is nowhere to plug your knock sensor(timing) onto the jdm motor.i swapped this motor into my 96 ex.