Wire Problems!!!!!!

hey i'm having trouble with my 91 accord ex. I'm putting in a kenwood kdc-322 head unit. The trouble is that i dont know where the honda's wires from the harness go to( i don't have a manual). The reason i'm not using an adapter kit is because the front speakers keep fading in and out around turns so i think that the wires might have a been severed or messed up. I'll be running new speaker wire to all the speakers. The speaker wires will be taken care of out of the harness; i know which the battery, the ignition, and the ground are; i have just two wires left. I have a power antennae with the car so i'm sure one or both go to it i just don't know which. Lastly the kenwood's harness has two wires coming out that aren't speaker or battery/ground/ignition ONE IS LABELED "P. CONT." THE OTHER IS LABELED "ANT. CONT." Please any help would be great!!!!!

sincerely DAN

You can probably find the wire map in the manual. You can find the manual here =>
http://www.kenwoodusa.com/support/manual.jsp?divisionId=3&productId=2488

I hope its not a stolen radio, cause only dickwad-motherfucking-cheap-wannabe-looser-spoiled-shitfaced-pimpled-smelly-bitches
support the theft of hard earned material.

On that note...

I strongly suggest you get yourself a harnes if you want a reliable signal. If you will be changing fuses like crazy. The pins are too close together not to have insolation around each signal. When one signal touches the other. zzzzapp. Whats the big deal anywayz a harness isl like $15 at a stereo shop and all the colors will match. OR you could keep hacking away at those wires till you have to add extensions.



ant. cont. is for antenna control (you dont have power antena)
p.cont . is for amps and such. ie. power control. It tells your amp to turn off and on at the same time as your radio.

Good luck.