I'm taking the heads off and replacing the gaskets on my 1997 Intrepid, (3.5L) Can anyone tell me the torque specs for putting the heads back on? Also any specs needed for the fuel injection system would be appreciated.
Thank you.
Marc

use the torque turn method (as per 3.5 engine manule page 9-62):
6 2 3 7
<- front of head
5 1 4 8

1st all to 45 ft#
2nd all to 65 ft#
3rd all again to 65 ft#
4th 1/4 turn more do not use a torque wrench (this should be over 90 ft# if not replace bolt)