|
|
HUXRacing Complete TurboSetUp 4Sale! 450+WheelHpwr (good buy)TOYRACR 11-10-2003, 03:28 PM (im just a friend posting this for Emily and Erix Hux www.HUXRACING.com) We are in the process of building another motor. Would prefer to sell as a complete setup. This setup is from our own red Mr2 seen at www.huxracing.com. -The list is as follows: Hux Racing Exhaust Manifold Stainless.Steel. Flange to Flange ITS Turbo 60-1 compressor T3 stage 5 turbine in special T4 chermachromed housing Turbine housing has a ceramic heat shield Oil feed line, oil drain line, & pan fitting Turbonetics Racegate Hux Racing Downpipe 3" chermachromed Includes flex pipe for WG connection Clears AC & requires remote oil filter Spearco air/water intercooler 2 1/2" inlet 3" oulet modified for application Enlarged water ports w/bleed port & S.S. stands Silicone blue hoses Intercooler to TB Elbow Constant tension hose clamps BBK Throttle Body 75mm w/Toyota Throttle, & cable braket modified for application HKS Super Sequential Blow Off mounted to I.C. Hux Racing Intake Manifold Full sheet 6061 Aluminum Long Runner manifold Setup for staged Injection, 2nd TFFR mounts to Intake Aluminum Intake brace Hux Racing Top Feed Fuel Rails (2) Upper standard TFFR & Lower Staged injection Fuel line between rails Water neck elbow S.S. red anodized relocating brackets for IC clearance hose & clamps Hux Racing Air/water trunk mounted tank, water pump,& Hux Racing custom trunk mounted fuel cell w/ Paxton 500lb/hr fuel pump are available for additional fee. Purchaser will receive all info necessary to duplicate motor from which this setup was removed from (cam specs, valve train, etc.) THE Total for setup $5500. Please Call 321.638-4077 or email huxeric@hotmail.com for any Questions. http://images.cardomain.com/member_images/8/web/380000-380999/380243_76_full.jpg :shades: http://images.cardomain.com/member_images/8/web/380000-380999/380243_53_full.jpg This set up can produce more than 450wheel Hpwr its just that the stand alone unit that the Hux's were using before was only good for up to 21lbs of boost. With a different stand alone computer like the new Accel DFI VII that just came out for 4cyl turbo Motors or just an Electronic Boost controller - you can produce alot MORE power using this Set up. :smokin: FYI. :iceslolan The motor it self is not for sale But Everything else is All parts are used and do not have alot of miles on them At all Seriously Everything is in Spectacular Shape. vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|