thats tight.

IS THERE ANY EASY WAY OF GETTING THE ORANGE OUT???

I PUT A HOLE IN MY TAILLIGHT YESTERDAY TRYING TO BREAK IT WITH A SCREWDRIVER. 8 P Sux @$$

People say dremmel tool...gotta try that but any easier way???

And is the front just like the baack??? Or is it easier (after getting the headlight out)




2002 G20 w/ Sports Package
Black Obsidian

Hyperwhite:
Headlights, foglights, map lights, dome light, license plate light, back up lights, and side repeaters

its all about wich tool you use the front yellow peice is just as hard as the back when you pop the headlight out to remove the yellow so definently go wit dremmel drill and make sure you dont pop out the yellow into the headlight before you drill the wholes cuz if you do then the plastic peice will be sliding back and forth in the headlight while you trying to drill it
i think you get what i'm saying
good luck!
casual

I say you can't do it without the dremmel tool. I used it and still had to
do most of the work with needle nose pliers. It would be nice to use a
cutting tool, but it wouldn't reach the amber piece.:cool:

i just put a drill bit in it and then used my dremmel like a rotozip saw if youve seen them on tv worked fine

hey guys, i just got my 2000 g20t and i saw the post up for clearing the corner for the car, but i ran into some problems i got out the drivers side long screw but i cant find the passenger side's screw can anyone help me? decribe where i might get to it easier cause the radiator is in the way and a thick wire blocking the way too please anyone help me....PLEASE