TPS adjustment settings?
O.P
09-07-2003, 10:27 AM
Does anyone know what the TPS settings are and what wires do you use to read them?
OP
OP
daman
09-07-2003, 07:31 PM
what year,motor etc.more info man.And i don't think those TPS are adjustable on bonns;atleast not on my '95.
O.P
09-08-2003, 12:49 PM
Its an '89 Bonneville w/ 3.8.
OP
OP
GMMerlin
09-09-2003, 06:27 AM
I'm doing this off the top of my head.
There are 3 wires to the TPS sensor.
gray is your 5v reference wire
black is the sensor ground
blue is the sensor signal wire to the ecm
If you back probe the blue wire( with a DVM to ground) with the key on/engine off, you should get a reading between .38 and .42 volts. That is the proper voltage at closed throttle.
There are 3 wires to the TPS sensor.
gray is your 5v reference wire
black is the sensor ground
blue is the sensor signal wire to the ecm
If you back probe the blue wire( with a DVM to ground) with the key on/engine off, you should get a reading between .38 and .42 volts. That is the proper voltage at closed throttle.
Automotive Network, Inc., Copyright ©2024