Window Masks Templates

Window Mask templates made to date. This will be a single thread I'll update.

Instructions:
Print them out on paper and cut then test for scale, they should print correct.
If correct, stick Tamiya 18mm/40mm wide tape over the top and cut them out, peel off paper and fix to inside of clear window unit,
then spray with Semi-gloss black, (airbrushing is best) remembering to apply in light coats to stop paint bleeding under masks.

Tamiya 300ZX
http://www.spc.org.uk/misc/300zx_window_mask.pdf
Aoshima RX7
http://www.spc.org.uk/misc/aoshima_rx7_window_mask.pdf
Tamiya Mitsubishi GTO
http://www.spc.org.uk/misc/mitsubishi_gto_window_mask.pdf
Revell New Mini
http://www.spc.org.uk/misc/revell_mini_window_mask.pdf
Aoshima R32
http://www.spc.org.uk/misc/aoshima_r32_window_masks.pdf
Tamiya R33
http://www.spc.org.uk/misc/tamiya_r33_window_masks.pdf
Tamiya RX-7 R1
http://www.spc.org.uk/misc/tamiya_rx7_window_masks.pdf
Tamiya Toyota Supra
http://www.spc.org.uk/misc/tamiya_supra_window_masks.pdf
Tamiya R32 Skyline
http://www.spc.org.uk/misc/tamiya_r32_window_masks.pdf
Fujimi Sileighty
http://www.spc.org.uk/misc/fujimi_sileighty_window_masks.pdf
Fujimi Mazda RX-8
http://www.spc.org.uk/misc/fujimi_rx-8_window_masks.pdf
Tamiya Skyline GTS 25t
http://www.spc.org.uk/misc/tamiya_gts25t_window_masks.pdf
Fujimi Nissan Skyline Coupe 350GT
http://www.spc.org.uk/misc/fujimi_skyline_350gt_window_masks.pdf
Fujimi Nissan Silvia S15
http://www.spc.org.uk/misc/fujimi_silvia_s15_window_masks.pdf
Aoshima R34 Skyline
http://www.spc.org.uk/downloads/aoshima_skyline_r34_window_masks.pdf

Thanks

Thanks Steve :bigthumb:

Tamiya R32 Skyline masks added now.

I hope this thread can be posted in the FAQ or How-to so anyone needing these window masks can find them easily.

It is in the How to's and has been for a while now. :smile:

Ok. Why not do 1 for the Tamiya Porsche 911 GT3. I had a horrid time masking it myself the last time, especially the side windows.

Originally posted by Junhao
Ok. Why not do 1 for the Tamiya Porsche 911 GT3. I had a horrid time masking it myself the last time, especially the side windows.
OK send me a kit and I will. :tongue:
No really I don't have that kit myself.

dude, what a great idea!! stickyy

Thanks, Steve!

Thanks for posting these!

Murray

Tamiya Skyline GTS 25t Masks now added

Thanks for the mask's, used em on my RX-8.

JeFF

Now added : Fujimi Nissan Skyline Coupe 350GT
Download here
http://www.spc.org.uk/misc/fujimi_skyline_350gt_window_masks.pdf
All comments welcome. :)

if you can, could u do a mask for the tailights or fc (round tail lights) im really unsure on how to do them....

(also trueno, and fd if you could, thanks)

Just out of interest Steve, how do you make these templates?
I've never been able to figure it out :confused:
Good job you've covered most of the kits I've need them for :iceslolan

Fujimi Nissan Silvia S15 (http://www.spc.org.uk/misc/fujimi_silvia_s15_window_masks.pdf) Added now click to download PDF File
Enjoy :)

:lol2: :banghead:...

:screwy:

Great work Steve !

Thanks
Rob

I tried using the window masks on the Revell Mini but they look to be about 10% too small when I tried the Adobe version.
Are they supposed to be like this?
Any suggestions?

I tried using the window masks on the Revell Mini but they look to be about 10% too small when I tried the Adobe version.
Are they supposed to be like this?
Any suggestions?

http://www.spc.org.uk/downloads/window-masks.jpg
Make sure you are printing 100% not Fit to Page

great steve! :smokin:

Hiroboy: It worked. Thanks for helping a newbie out.

I didn't use masking tape though. I hijacked a sheet of 6 panel mailing labels from work and printed on that. Worked very well for me aside from a little residue that I had to take off afterwards.

I didn't use masking tape though. I hijacked a sheet of 6 panel mailing labels from work and printed on that. Worked very well for me aside from a little residue that I had to take off afterwards.

Man, you MUST get Tamiya tape. Trust me, there's NO substitute!!

we dont get tamiya tape around here and i cant get things off of the internet cuz i have no credit card, but i use automotive masking tape which works very good for me, but if i stick the masking tape to paper from the printer, when i peel it off, wont it just rip the paper off onto it?

The Aoshima Nissan Skyline R34 Window Masks has been added to the list at the top.
Enjoy

we dont get tamiya tape around here and i cant get things off of the internet cuz i have no credit card, but i use automotive masking tape which works very good for me, but if i stick the masking tape to paper from the printer, when i peel it off, wont it just rip the paper off onto it?

No, as long as you stick it down lightly then trace the shape lightly with a pen, you'll be able to lift it off without losing too much of the tapes stickiness.

Thanks a lot for those window mask.
When I tried to download 300ZX's masks, it said restricted area :-(
Is it normal?
Thanks!

hey, im new here and i just want to know if any of you guys have a PDF file for the Tamiya Castrol Mugen NSX window masking thing, i unfortunately lost mine..-.-"

thx, and sry for bringing up an old thread

-ic3d

Could have some EVOs too :( :(

No, as long as you stick it down lightly then trace the shape lightly with a pen, you'll be able to lift it off without losing too much of the tapes stickiness.

I havent tryed this but heres another methode I read about once.
take a sheet of those stickers that you can print lables on (avery lables I think) and take all the stickers off. then cover the sheet with masking tape. then print onto the masking tape. cut out your mask and your good to go.

Thank you, Hiroboy.

I printed the masks for the Toyota Supra, but there are not masks for the side windows. :( :( :(

somedody help me.
im looking for masking window for TAMIYA BMW Z3.
where i found it?
pls help.

I havent tryed this but heres another methode I read about once.
take a sheet of those stickers that you can print lables on (avery lables I think) and take all the stickers off. then cover the sheet with masking tape. then print onto the masking tape. cut out your mask and your good to go.

Now that sounds like a darned good simple idea! Especially now that there is Tamiya 40mm tape readily available.

I wonder if it really works? Anyone tried it? Or do I have to risk destroying my printer for myself? :biggrin:

http://www.spc.org.uk/downloads/24145.jpg
Tamiya Nissan Skyline R33 GT-R (Revised Version)
http://www.spc.org.uk/downloads/Tamiya-R33-GTR-revised.pdf

wow very nice. Do you have one for the Tamiya 2002 WRX WRC ver.? I happened to ruined mine ><"

If you do not see masks for the kit you're building, they are not available here.

Please do not ask for them here.

This is something Steve did himself many years ago, and decided to generously share with the community here. He IS NOT TAKING REQUESTS for more masks now- he is busy running his web store.

This gives me the idea of going into the window masks business. :evillol:

THANKS!!!! just what I need to finish my 2F2F Skyline