I'm doing up my integra Ls, any suggestions?

I'm doing up my honda integra Ls 1990, i have $5000 to play with, does anyone have any suggestions as to what i should do first?

Wrong forum! Moved... :wink:

I'm doing the same, this is what i'm going to do. A friend ran the same setup as I"m going to and ran a 13. on 5psi of boost......plus he was a crappy driver. So if you build it right and run more boost you should be pretty quick.
GSR-tranny
ACT Clutch
9lb. flywheel
Knife-edged crank
eagle h-beam rods
ross racing pistons 9:1 Compression
blockguard
new crower valvetrain
crower turbo cams
jg victor x-manifold
jg throttle body
t3/t4 turbo set-up
driveshaft shop axles
msd 6al igntion

sounds good only thing i would add is darton sleeves you can run alot of freakin boost with them suckers:bigthumb:

go high compression. i am running 14.3 now and i have a turbo in the back of the car. My freind has an ls (stock) with a t3 pushing 10psi and runs 13.2 stock he was running 15.3. So if i boost 7psi i should hit high 12's