hello all,


Would anybody know what is the max boost on a R33 GTS25T ??

thank you =D

this is not gospel , but because of the ceramic rotors 1.2 bar
stock is 0.7 bar , im going to take mine to 1 bar , ill let u know.
BOOM

Figures I have say 7 psi stock and 12 psi max. ( .7 bar = 10.5 psi and 1.2 bar = 18 psi). Kin, big difference !!! - anyone confirm either of these figures?

12 PSI max , is about 0.822 Bar. Is that the max the R33 can produce? that isn't alot.. hehe..

thanks for your imput .. =)

it is 12psi for s/2 and 14psi for s/1

14 psi is t he MAXIMUM Boost the turbo can handle right?

Is there a reason why it is so low?

thank you.

Yepp, the heat and speed (shaft speed) caused by running higher boost will heat up the adhesive used to bond the ceramic wheel to the steel shaft.

When the adhesive doesn't do it's job, the ceramic wheel will spin off the shaft and end up somewhere it's not meant to be!!!!!

For the Series 2's substiute the word "Ceramic" for Plastic!!!

They are great factory turbo's, they just have a limit that is lower than other factory turbo's.

J

:bloated: