Rallycross BMW M3 E30 of swedich driver Bengt Ekström base BEEMAX 1/24
racer1
09-18-2017, 07:23 AM
Rallycross BMW M3 sports evolution of Bengt Ekström (father of Mattias Ekström both acquainted as DTM driver as World champion rallycross 2016).
The car date from the early 90's, and was a gr A car,2 wheel drive.
I used as a base a Beemax kit where the necessary changes were made.
http://www.automotiveforums.com/vbulletin/attachment.php?attachmentid=55322&stc=1&d=1505737372
The car date from the early 90's, and was a gr A car,2 wheel drive.
I used as a base a Beemax kit where the necessary changes were made.
http://www.automotiveforums.com/vbulletin/attachment.php?attachmentid=55322&stc=1&d=1505737372
racer1
09-18-2017, 07:30 AM
First of all ,I made the tyres and rims,they 're 3D disigned and printed.
http://www.automotiveforums.com/vbulletin/attachment.php?attachmentid=55323&stc=1&d=1505737788
http://www.automotiveforums.com/vbulletin/attachment.php?attachmentid=55323&stc=1&d=1505737788
racer1
09-18-2017, 07:36 AM
There is no engine in the kit of Beemax.
Therefore I have used the engine of Modellingmaster(Roman),and changed a lot of things,like the inlet manifould,the exhaust and the valve cover.
I made a design in of the valve cover and let it print.
http://www.automotiveforums.com/vbulletin/attachment.php?attachmentid=55324&stc=1&d=1505738185
Therefore I have used the engine of Modellingmaster(Roman),and changed a lot of things,like the inlet manifould,the exhaust and the valve cover.
I made a design in of the valve cover and let it print.
http://www.automotiveforums.com/vbulletin/attachment.php?attachmentid=55324&stc=1&d=1505738185
racer1
09-18-2017, 07:40 AM
racer1
09-18-2017, 07:44 AM
corrrado
09-20-2017, 03:41 PM
Really great build! :) Great job on the engine!
racer1
10-03-2017, 04:27 PM
LucaC.74
10-05-2017, 04:56 PM
nice detail on the engine .. and also the rest:)
johanthemodeler
10-07-2017, 04:41 PM
There is no engine in the kit of Beemax.
Therefore I have used the engine of Modellingmaster(Roman),and changed a lot of things,like the inlet manifould,the exhaust and the valve cover.
I made a design in of the valve cover and let it print.
http://www.automotiveforums.com/vbulletin/attachment.php?attachmentid=55324&stc=1&d=1505738185
Do you print on shapeways? Maybe start a shop there ?
Therefore I have used the engine of Modellingmaster(Roman),and changed a lot of things,like the inlet manifould,the exhaust and the valve cover.
I made a design in of the valve cover and let it print.
http://www.automotiveforums.com/vbulletin/attachment.php?attachmentid=55324&stc=1&d=1505738185
Do you print on shapeways? Maybe start a shop there ?
racer1
10-07-2017, 04:51 PM
Yes,I make the design and shapeways prints that for me.
racer1
10-11-2017, 05:36 AM
Finally he is ready the rallycross BMW M3 evo of Bengt Ekström(father of Worldchampion rallycross 2016 and DTM driver Matias Ekström)
This is definitely not O.O.B. what most model builders build.
The full suspension was changed, the roller cage and the interior were adjusted.
Rims were drawn in 3D and printed like the tires that are also of resin.
The engine comes largely from modeling master, but the valve cover was changed and re-drawn and printed in 3D, as well as the inlet collector....
Finally, the decals are also signed by myself.
http://www.automotiveforums.com/vbulletin/attachment.php?attachmentid=55354&stc=1&d=1507717939
http://www.automotiveforums.com/vbulletin/attachment.php?attachmentid=55355&stc=1&d=1507718052
http://www.automotiveforums.com/vbulletin/attachment.php?attachmentid=55356&stc=1&d=1507718052
This is definitely not O.O.B. what most model builders build.
The full suspension was changed, the roller cage and the interior were adjusted.
Rims were drawn in 3D and printed like the tires that are also of resin.
The engine comes largely from modeling master, but the valve cover was changed and re-drawn and printed in 3D, as well as the inlet collector....
Finally, the decals are also signed by myself.
http://www.automotiveforums.com/vbulletin/attachment.php?attachmentid=55354&stc=1&d=1507717939
http://www.automotiveforums.com/vbulletin/attachment.php?attachmentid=55355&stc=1&d=1507718052
http://www.automotiveforums.com/vbulletin/attachment.php?attachmentid=55356&stc=1&d=1507718052
firun
10-11-2017, 05:39 AM
Looks beautiful!
LucaC.74
10-11-2017, 02:41 PM
really great!!!
lovegt40
10-12-2017, 11:18 AM
Really nice
Johan_SWE
10-12-2017, 11:33 AM
Nice work!
corrrado
10-13-2017, 01:57 PM
Really great build! Nice details and the engine bay is superb! :)
Automotive Network, Inc., Copyright ©2024