cruise control


GordonL
04-14-2017, 07:47 PM
I just bought a 2013 Tacoma and it did not come with cruise. I bought a kit which contained the Toyota parts and a wiring harness plus a clutch switch because it is a manual transmission. I got everything installed and wired OK. I have double checked the wiring but it just does not work. The trouble shooting says to check for voltage at the switch under the shroud on the steering wheel. I do not have any voltage so it says to check the continuity from the connector under the air bag to the ECM but I have no idea where to find the correct wires, Has anyone ever installed one of these and have any idea where to check the circuit?

The only wiring diagram I have is the Haynes manual which is extremely sketchy.

somick
04-15-2017, 12:09 PM
I have seen a similar thread at Toyotanation.

If I find it there I will post it here.

Good luck,
Sam

somick
04-15-2017, 12:40 PM
See if that thread will help you:
http://www.toyotanation.com/forum/61-tacoma-2nd-generation-2005-2015/171992-diy-oem-cruise-control.htmlwill

Good luck,
Sam

GordonL
04-17-2017, 04:47 PM
I do not know what the problem may be with the Toyotanation Forum. I was out of town and was able to view the discussion on my Kindle but thought that I would wait to look at it on my computer. My computer does not go to the discussion. I tried to register and received a text for verification but when I try to log in it asks for image verification but there is no image. I cannot contact them because again it asks for image verification but no image. I cannot even do a search without image verification. Any ideas?

The discussion looked interesting but as I said I thought that I would wait to be able to see it in large format.

Thank you.

somick
04-18-2017, 02:21 PM
I do not know what the problem may be with the Toyotanation Forum. I was out of town and was able to view the discussion on my Kindle but thought that I would wait to look at it on my computer. My computer does not go to the discussion. I tried to register and received a text for verification but when I try to log in it asks for image verification but there is no image. I cannot contact them because again it asks for image verification but no image. I cannot even do a search without image verification. Any ideas?

The discussion looked interesting but as I said I thought that I would wait to be able to see it in large format.

Thank you.I would wait. It may take time to replicate their servers.

Try to Google it.

Good luck,
Sam

GordonL
04-18-2017, 03:41 PM
I can get in through Facebook. I am not too keen on that. Facebook tracks everything.

I did figure out what my problem is. Where they show wires into the ECM they show face. That means the end of the plug without wires. I thought that it would be the other way around. In any case once I got the wires in the right place it works.

somick
04-19-2017, 11:32 AM
I can get in through Facebook. I am not too keen on that. Facebook tracks everything.

I did figure out what my problem is. Where they show wires into the ECM they show face. That means the end of the plug without wires. I thought that it would be the other way around. In any case once I got the wires in the right place it works.
Great!

I am glad you figured it out and it works.

Sam

Add your comment to this topic!