Pagani Zonda F

Hello friends!
I think, this will be interesting for most of you. After many years I have decided to start the works on this model. I like it much more than the Huayra.
https://img-fotki.yandex.ru/get/197852/14224223.67/0_cd62f_68144ba4_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/841263?page=1)

As a donor the die cast model from Mondo Motors will be used. Also, an engine from Tamiya's Mercedes-Benz S600 Coupe and some parts from Aoshima's Pagani Huayra will be used in the project. So, let's start.
The donor.
https://img-fotki.yandex.ru/get/5601/mikhailpetrenko.19/0_4eb0f_f9cd90d_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/322319?page=0)

Not bad at all, but in many ways looks as a toy.

The engine from Tamiya (without a gearbox).
https://img-fotki.yandex.ru/get/41138/14224223.66/0_cd61d_8b1b0735_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/841245?page=1)

https://img-fotki.yandex.ru/get/104083/14224223.66/0_cd61e_f2a7902_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/841246?page=1)

https://img-fotki.yandex.ru/get/93949/14224223.66/0_cd61f_22a22537_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/841247?page=1)

First of all, the body paint was deleted.
https://img-fotki.yandex.ru/get/44369/14224223.66/0_cd62b_be258772_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/841259?page=1)

The cleared metal body.
https://img-fotki.yandex.ru/get/196060/14224223.66/0_cd62c_ab8e00a0_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/841260?page=1)

The seats are too small. I will use the seats from Huayra as a donor (on the right).
https://img-fotki.yandex.ru/get/106972/14224223.67/0_cd672_e8a232a4_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/841330?page=1)

These are the parts of the powertrain to be made from scratch.
https://img-fotki.yandex.ru/get/101212/14224223.67/0_cd7ba_5a2ff614_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/841658?page=1)

The blueprint of the gearbox, which I have found in the Internet. Thanks to http://www.gt40s.com/forum/
https://img-fotki.yandex.ru/get/198488/14224223.67/0_cd7b9_f63f724e_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/841657?page=1)

The very beginning of the body works.
https://img-fotki.yandex.ru/get/195694/14224223.67/0_cd671_377eb835_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/841329?page=1)

https://img-fotki.yandex.ru/get/197700/14224223.67/0_cd673_fe1e41e2_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/841331?page=1)

The first attempt of the interior and the engine installation. After that I have decided to use a complete bath from Huayra. I will show this in the next update.
https://img-fotki.yandex.ru/get/133748/14224223.67/0_cd630_dc14693b_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/841264?page=1)

https://img-fotki.yandex.ru/get/195431/14224223.67/0_cd631_552b6df0_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/841265?page=1)

That's all for now.

Looking good, but I want to see the One-77 finished! ;)

Thank you Bernard! The One-77 still have the high priority in my range of the started projects.

My brother has helped me with a 3D model of a gearbox. Thank you brother!
https://img-fotki.yandex.ru/get/195990/14224223.67/0_cd931_a24ffbe9_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/842033)

https://img-fotki.yandex.ru/get/114704/14224223.67/0_cd83d_1e3cf6c_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/841789)

I think someone did this model already in model cars mag forum without any 3rd printing I think...

Great Start !!

amazing work as usual, and also I like the Zonda a lot more than recent pagani´s

Is a real pleasure to see this artworks in progress, always thanks for sharing Mikhail !

The Zonda is so nice! Very good choice.

sportracer02, lovegt40, ChristopheB: Thank you!
Update.
The platform before and after.
https://img-fotki.yandex.ru/get/194425/14224223.67/0_cd87d_11cae344_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/841853)

https://img-fotki.yandex.ru/get/251308/14224223.67/0_cd87e_dec41a08_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/841854)

The body after cutting.
https://img-fotki.yandex.ru/get/196365/14224223.67/0_cd87f_ebb3e08c_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/841855)

The monocoque and the rear subframe.
https://img-fotki.yandex.ru/get/107473/14224223.67/0_cd87c_585c2fcd_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/841852)

The dry assembly.
https://img-fotki.yandex.ru/get/194804/14224223.67/0_cd880_712b3c02_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/841856)

This is great! I am so glad you are taking this on, these lunatic cars are so cool but most of us will only be able to tackle the Huayra. I can't wait to see more!

Thank you willimo!
Continuing to work with the body.
https://img-fotki.yandex.ru/get/47741/14224223.67/0_cda47_84d85703_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/842311?page=2)

https://img-fotki.yandex.ru/get/110545/14224223.67/0_cda46_83181c8c_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/842310?page=2)

https://img-fotki.yandex.ru/get/165720/14224223.67/0_cda4a_64c62629_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/842314?page=2)

https://img-fotki.yandex.ru/get/110545/14224223.67/0_cda49_3357779b_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/842313?page=2)

https://img-fotki.yandex.ru/get/197756/14224223.67/0_cda48_4a8b6568_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/842312?page=2)

https://img-fotki.yandex.ru/get/165720/14224223.67/0_cda4b_f2fc1289_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/842315?page=2)

https://img-fotki.yandex.ru/get/222565/14224223.67/0_cda4c_f1f9ec8d_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/842316?page=2)

Some works on the platform. The holes were filled with colored epoxy glue. The front lip was glued. This is the first step of the body assembling.
https://img-fotki.yandex.ru/get/196141/14224223.67/0_cdc1a_47aa947f_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/842778)

https://img-fotki.yandex.ru/get/171750/14224223.67/0_cdc1b_3e82b534_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/842779)

I also have a diecast kit and have looked at adding some detail to it but nothing like this. I'm really enjoying following along. One of the challenges that I have run into is replacing the emblems if I strip the paint. Are you planning on creating new decals and if so would print some extra for sale?

Paul Erlendson

2 PJE48: Thank you Paul! I didn't decide about emblems yet. It's a part of a far future, but I'll have you in mind.

The futher sills modification. The last fixing points had gone.
https://img-fotki.yandex.ru/get/96803/14224223.67/0_cdd1d_8abd0211_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/843037)

Checking of matching with the interior bath.
https://img-fotki.yandex.ru/get/133748/14224223.67/0_cdd1e_b456f091_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/843038)

https://img-fotki.yandex.ru/get/96803/14224223.67/0_cdd1f_36075d9e_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/843039)

The roof has lost the front flange.
https://img-fotki.yandex.ru/get/60380/14224223.67/0_cdd20_546c07b4_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/843040)

I did not dare to open holes in the sills - very thick metal there. But sooner or later it had to happen.
https://img-fotki.yandex.ru/get/196161/14224223.67/0_cdd7a_8e9da46b_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/843130?page=0)

https://img-fotki.yandex.ru/get/244791/14224223.67/0_cdd78_eb88a7dd_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/843128?page=0)

https://img-fotki.yandex.ru/get/6422/14224223.67/0_cdd7c_8337c02_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/843132?page=0)

https://img-fotki.yandex.ru/get/48627/14224223.67/0_cdd7b_e9b756a7_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/843131?page=0)

I continue to work with the rear subframe. It is quite different from Huayra's.
https://img-fotki.yandex.ru/get/48627/14224223.67/0_cdd79_47887b08_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/843129?page=0)

https://img-fotki.yandex.ru/get/197102/14224223.67/0_cdd7e_47ab6fc_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/843134)

The rear lower arms also in the process of rework.
https://img-fotki.yandex.ru/get/194858/14224223.67/0_cdd7d_60c5da98_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/843133)
It is necessary to remake all the levers. They are different in the Huayra , unfortunately.
https://img-fotki.yandex.ru/get/196631/14224223.67/0_cdd7f_6c8c05bc_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/843135)

Impressive work!

Thank you Bernard! But the most impressive work is ahead. I just have to force myself to finish this model without long breaks.

Awesome work! What did you do to strip the paint?

2 lechatnior82: Thank you! I have used this paint remover.
https://img-fotki.yandex.ru/get/197852/14224223.67/0_cd62e_4a7af1de_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/63109/view/841262)
But it is not useful for plastic, because it is very agressive and eats almost all plastics.

The first arm is ready. I have spent for it the whole week.
https://img-fotki.yandex.ru/get/197700/14224223.67/0_ce305_ecb5cbd6_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/844549)

https://img-fotki.yandex.ru/get/30752/14224223.68/0_ce307_b83f345f_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/844551)

The comparison with the donor from Huyara.
https://img-fotki.yandex.ru/get/109793/14224223.67/0_ce306_daaf735a_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/844550)

The next will be a front lower arm.
The donor from Huyara.
https://img-fotki.yandex.ru/get/44819/14224223.68/0_ce308_82b2643e_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/844552)

This is what I need to make.
https://img-fotki.yandex.ru/get/4409/14224223.67/0_ce304_60a80173_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/844548)

Small update.
The rear subframe from Huayra was cut a bit.
https://img-fotki.yandex.ru/get/198569/14224223.68/0_ce499_7291963c_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/844953?page=0)

https://img-fotki.yandex.ru/get/194503/14224223.68/0_ce49a_45691fd1_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/844954?page=0)

The sides of the monocoque (grey color) were cut and have glued with inclination.
https://img-fotki.yandex.ru/get/149948/14224223.68/0_ce548_809d9730_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/845128?page=0)

https://img-fotki.yandex.ru/get/51236/14224223.68/0_ce549_62336289_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/845129?page=0)

https://img-fotki.yandex.ru/get/98645/14224223.68/0_ce54a_ecd5d4fe_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/845130?page=0)

https://img-fotki.yandex.ru/get/98645/14224223.68/0_ce54d_55ebebed_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/845133?page=0)

My brother has started to create some 3D models (intake, air filter, subframe and etc.). So, I have decided to modify the engine a bit.
https://img-fotki.yandex.ru/get/117896/14224223.68/0_ce54b_7c5016cd_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/845131?page=0)

https://img-fotki.yandex.ru/get/215803/14224223.68/0_ce54c_d0de26b2_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/845132?page=0)

https://img-fotki.yandex.ru/get/196486/14224223.68/0_ce49b_aa5eac29_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/844955?page=0)

The 3D models of an air filter was done.
https://img-fotki.yandex.ru/get/194503/14224223.68/0_ce620_f00ca787_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/845344?page=0)

https://img-fotki.yandex.ru/get/197923/14224223.68/0_ce621_f1133513_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/845345?page=0)

https://img-fotki.yandex.ru/get/196486/14224223.68/0_ce625_a53472d4_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/845349?page=0)

I have started to find a right position of the monocoque. I have used the front suspension from Huayra for this purpose.
https://img-fotki.yandex.ru/get/196121/14224223.68/0_ce622_12adc515_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/845346?page=0)

https://img-fotki.yandex.ru/get/198998/14224223.68/0_ce623_fd15c9d4_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/845347?page=0)

To create a correct bottom side of a sill I am using this picture, but I need more pictures.
https://img-fotki.yandex.ru/get/172931/14224223.68/0_ce624_3597667a_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/845348?page=0)

Some more 3D from my brother.
https://img-fotki.yandex.ru/get/177902/14224223.68/0_ce976_514b3768_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/846198?page=0)

https://img-fotki.yandex.ru/get/177902/14224223.68/0_ce977_6dc6cdb2_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/846199?page=0)

amazing stuff. thanks for sharing my Friend.

The 3D model of an intake manifold.
https://img-fotki.yandex.ru/get/198613/14224223.68/0_cea2d_8bc0123_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/846381)

https://img-fotki.yandex.ru/get/195518/14224223.68/0_cea2f_79a10a97_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/846383)

https://img-fotki.yandex.ru/get/99813/14224223.68/0_cea2e_4902fe9e_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/846382)

Great work Mikhail (and your brother work too)!

This is truly amazing work!!!

Small update after a long break.
I have bought a 3D printer.
https://img-fotki.yandex.ru/get/48807/14224223.6b/0_d0431_53a1f917_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/63109/view/853041)

These are the first parts I have received, and I have mostly satisfied.
https://img-fotki.yandex.ru/get/99813/14224223.6b/0_d0447_ecce0371_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/853063)

Cleared from supports.
https://img-fotki.yandex.ru/get/228104/14224223.6b/0_d044b_71955505_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/853067)

https://img-fotki.yandex.ru/get/145691/14224223.6b/0_d044c_4823b549_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/853068)

Great work and nice updates

Another great project of one of my all time favorite cars. Excellent work as always! :thumbsup:
Mikhail, you are lining them up faster then Fujimi and Aoshima!

2 Niro750, jano11: Thank you!

Dear Ioan, I need more than 48 hours in a day to speed up my projects. I hope the printer will help me a bit. :)

I sure will! Having prototyping at your fingertip is a big step forward. I am glad you have it now.
Next you need a time machine! If you find one let me know, I'll buy one immediately. ;-)

Today, the gearbox was printed.
https://img-fotki.yandex.ru/get/105284/14224223.6b/0_d0791_6ca1841b_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/853905)

https://img-fotki.yandex.ru/get/221708/14224223.6b/0_d0792_a01847ad_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/853906)

https://img-fotki.yandex.ru/get/223280/14224223.6b/0_d0793_b291a6d9_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/853907)

Nice work, Mikhail. Go!

Some works on the engine was done to fit the intake manifold.
https://img-fotki.yandex.ru/get/243077/14224223.6c/0_d13fe_ecb1d320_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/857086)

https://img-fotki.yandex.ru/get/196600/14224223.6c/0_d13ff_8a5caf8_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/857087)

https://img-fotki.yandex.ru/get/194869/14224223.6c/0_d1400_3268283b_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/857088)

Engine looks very nice! :thumbsup:

The rear subframe just from 3D printer.
https://img-fotki.yandex.ru/get/370378/14224223.6f/0_d7f84_dffbb301_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/884612)

https://img-fotki.yandex.ru/get/880375/14224223.6f/0_d7f97_d1e5544d_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/884631)

https://img-fotki.yandex.ru/get/877700/14224223.6f/0_d7f96_a350ae55_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/884630)

Hi Mikhail,

I assume there are pictures in your last few posts? I can't see anything there :S. I'd love to see the latest steps on your Zonda

to sky1911 (http://www.automotiveforums.com/vbulletin/member.php?u=671222): It is very strange, that you don't see the photos. I have been using the same photobank for many years.
Probably, you have some restrictions to the Russian sites. You can try any additions like https://fri-gate.org/ (https://fri-gate.org/), https://browsec.com/en/, etc.

Cheer Mikhail,

I checked on another computer with another browser. As it turns out, an anti-tracking extension I've added to Chrome on my main rig is causing the images not to be shown.
They showed just fine on the other machine.

Great work on the Zonda!

Coming soon! The exhaust system. 3D from my brother.
https://img-fotki.yandex.ru/get/517076/14224223.71/0_d9e6b_21832c39_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/892523)

https://img-fotki.yandex.ru/get/483372/14224223.71/0_d9e6c_4140dd5a_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/892524)

https://img-fotki.yandex.ru/get/480548/14224223.71/0_d9e6d_d4b8af25_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/892525)

Man, that exhaust looks really good!

I have found in my stash the needed muffler ends.
https://img-fotki.yandex.ru/get/904253/14224223.71/0_da10b_d8c18882_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/893195)

Some improvement on an air filter. I printed a new upper part of a case.
https://img-fotki.yandex.ru/get/904253/14224223.71/0_da10a_66116ab_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/893194)

https://img-fotki.yandex.ru/get/509531/14224223.71/0_da109_bddf7c69_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/893193)

The 3D assembly.
https://img-fotki.yandex.ru/get/904253/14224223.71/0_da10c_516d89c_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/893196)

https://img-fotki.yandex.ru/get/904253/14224223.71/0_da10d_3adc9ab5_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/893197)

My brother has built the upper arms and anti-roll bar.
https://img-fotki.yandex.ru/get/909751/14224223.71/0_da241_c137077d_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/893505)

https://img-fotki.yandex.ru/get/906092/14224223.71/0_da240_779e7fa7_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/115157/view/893504)

Amazing!

Thanks for share your project.

Cheers

Small update. I have printed some new parts.
https://farm2.staticflickr.com/1750/40760701280_afa6ddee21_c.jpg (https://flic.kr/p/256TfpJ)IMG_4272 (https://flic.kr/p/256TfpJ) by Mikhail Petrenko (https://www.flickr.com/photos/93935557@N04/), on Flickr

Small update.
Have made a later type of a silencer. Have added rear bottom arms and rear knuckles.

https://farm2.staticflickr.com/1766/43330873451_461b328012_c.jpg (https://flic.kr/p/2921442)


https://farm2.staticflickr.com/1829/29542602898_6ffc7eba22_c.jpg (https://flic.kr/p/M1zyAo)


https://farm2.staticflickr.com/1821/41522451060_884784919b_c.jpg (https://flic.kr/p/26gcq5C)


https://farm2.staticflickr.com/1769/42824141594_8b4bc448c5_c.jpg (https://flic.kr/p/28fdVjS)

Very cool. Should be very unique kit when finished.

Superb model.