Rebuilding Fujimi's Sil-80 (1:24)
marcopreto
11-08-2016, 03:51 AM
Completed more than 10 years ago this was my first car model.
A couple of months ago, while cleaning up the model's shelf, my cat managed to throw some from the table top to the floor! I decided to repair them and this is the result of repainting the Sil-80.
After removing all body paint and repairing some problems, a coat of primer was applied.
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_01_zpshjekfj4v.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_02_zpsnljj1qka.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_03_zpsk28qjagu.jpg
Some small issues were noticed and corrected before the application of a further primer coat, readying it for color application.
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_04_zpsgqjwzvl6.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_05_zpsrczkgxhe.jpg
After 2 coats of paint, decals were applied.
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_06_zpszhbvu69p.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_07_zps54uvviij.jpg
I hope to apply clear gloss soon and complete it in a couple of weekends.
Cheers
Marco Preto
http://mpminiatures.wordpress.com
A couple of months ago, while cleaning up the model's shelf, my cat managed to throw some from the table top to the floor! I decided to repair them and this is the result of repainting the Sil-80.
After removing all body paint and repairing some problems, a coat of primer was applied.
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_01_zpshjekfj4v.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_02_zpsnljj1qka.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_03_zpsk28qjagu.jpg
Some small issues were noticed and corrected before the application of a further primer coat, readying it for color application.
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_04_zpsgqjwzvl6.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_05_zpsrczkgxhe.jpg
After 2 coats of paint, decals were applied.
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_06_zpszhbvu69p.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_07_zps54uvviij.jpg
I hope to apply clear gloss soon and complete it in a couple of weekends.
Cheers
Marco Preto
http://mpminiatures.wordpress.com
marcopreto
11-14-2016, 05:36 AM
Here are a few more photos.
After polishing the clear coated base color, the body was masked and satin black was applied (sorry for the bad white balance on these photos).
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_08_zpspxbiiyyj.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_09_zpsssksz6uw.jpg
After removing the mask, a tooth pick was used to clean up some paint that creaked under the masking tape.
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_10_zpslimu6euz.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_11_zps5wiartyt.jpg
I hope to post more soon.
Cheers
Marco Preto
http://mpminiatures.wordpress.com
After polishing the clear coated base color, the body was masked and satin black was applied (sorry for the bad white balance on these photos).
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_08_zpspxbiiyyj.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_09_zpsssksz6uw.jpg
After removing the mask, a tooth pick was used to clean up some paint that creaked under the masking tape.
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_10_zpslimu6euz.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/Sil-80_reborn_11_zps5wiartyt.jpg
I hope to post more soon.
Cheers
Marco Preto
http://mpminiatures.wordpress.com
MidMazar
11-16-2016, 07:11 PM
:thumbsup:
marcopreto
11-28-2016, 08:42 AM
Finally completed:
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/sil80_f01_zpsxviq8ecc.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/sil80_f02_zpskeiaquey.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/sil80_f03_zpsno5vdnh8.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/sil80_f04_zpsfkyiidzo.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/sil80_f05_zpsn6lb7qkw.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/sil80_f06_zpsuvlm5czp.jpg
Cheers
Marco Preto
http://mpminiatures.wordpress.com
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/sil80_f01_zpsxviq8ecc.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/sil80_f02_zpskeiaquey.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/sil80_f03_zpsno5vdnh8.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/sil80_f04_zpsfkyiidzo.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/sil80_f05_zpsn6lb7qkw.jpg
http://i14.photobucket.com/albums/a328/marcopreto/sil80model/sil80_f06_zpsuvlm5czp.jpg
Cheers
Marco Preto
http://mpminiatures.wordpress.com
Martini Man
11-28-2016, 09:22 PM
very nice,
Have also been working on this one didn't know what color to paint it. now i do.
Paul
Have also been working on this one didn't know what color to paint it. now i do.
Paul
circuitR
04-21-2017, 02:51 AM
As I have this kit, seeing this makes me want to build it. Cheers for the inspiration
Automotive Network, Inc., Copyright ©2024