1:12 Fujimi AXES Nissan R32 GTR
circuitR
10-19-2014, 04:17 AM
Hi guys,
Been a while since I did a WIP on here. Been on a building buzz for the last few months so we will see how long it lasts lol.
I brought this kit over 5yrs ago and had tinkered with it a bit here and there. Never really committing to getting into it. But after getting my eye back in with the Hiace van. I'm feeling confident again.
So, this is what I have done so far.
First of all, this thing is huge and it needs lowering. The front had about 2 degrees of positive camber.
http://tapatalk.imageshack.com/v2/14/10/19/e96771528e5949d09d587077eb8653cb.jpg
So a bit of cutting and gluing sorted that out.
http://tapatalk.imageshack.com/v2/14/10/19/e9920f61178c20d882de1914f64a4b1c.jpg
Sitting much better
http://tapatalk.imageshack.com/v2/14/10/19/c24c3e8ea8432dd7d6a0f0e23a6cd9d8.jpg
I also re made the headers as the ones I made ages ago were not good. They still need some work.
http://tapatalk.imageshack.com/v2/14/10/19/839ac3bb7a7af31e0121b13d3ba60215.jpg
Also, stripped the wheels as I've changed my mind on that too.
http://tapatalk.imageshack.com/v2/14/10/19/1de1571c2aee2415075645f6c8f5d573.jpg
Thanks for looking.
Been a while since I did a WIP on here. Been on a building buzz for the last few months so we will see how long it lasts lol.
I brought this kit over 5yrs ago and had tinkered with it a bit here and there. Never really committing to getting into it. But after getting my eye back in with the Hiace van. I'm feeling confident again.
So, this is what I have done so far.
First of all, this thing is huge and it needs lowering. The front had about 2 degrees of positive camber.
http://tapatalk.imageshack.com/v2/14/10/19/e96771528e5949d09d587077eb8653cb.jpg
So a bit of cutting and gluing sorted that out.
http://tapatalk.imageshack.com/v2/14/10/19/e9920f61178c20d882de1914f64a4b1c.jpg
Sitting much better
http://tapatalk.imageshack.com/v2/14/10/19/c24c3e8ea8432dd7d6a0f0e23a6cd9d8.jpg
I also re made the headers as the ones I made ages ago were not good. They still need some work.
http://tapatalk.imageshack.com/v2/14/10/19/839ac3bb7a7af31e0121b13d3ba60215.jpg
Also, stripped the wheels as I've changed my mind on that too.
http://tapatalk.imageshack.com/v2/14/10/19/1de1571c2aee2415075645f6c8f5d573.jpg
Thanks for looking.
countach79
10-19-2014, 04:44 AM
Looking good mate
That's a detailers dream!
Are you going with the grey colour?
Keep it up, can't wait for more
That's a detailers dream!
Are you going with the grey colour?
Keep it up, can't wait for more
GTRfan01
10-19-2014, 05:05 AM
i'll be watching this one, keep em coming :)
Mr Plumb
10-19-2014, 08:29 AM
Can't beat a 1/12 Skyline! Dying to start mine!
May I ask where you got the BBS wheels from? Did they come from the white box art of the 1/12 kit?
May I ask where you got the BBS wheels from? Did they come from the white box art of the 1/12 kit?
nugundam93
10-19-2014, 01:38 PM
nice to see a 1/12 r32 build again :)
da_ashman
10-19-2014, 06:23 PM
Awesome work so far & a massive cheers for the heads up on the Wheel fit issue!
Ive got the super rare Veilside R1 Drag 1/12 GTR sitting waiting pateintly for me to start on her, so will be following this closely!!!
Ive got the super rare Veilside R1 Drag 1/12 GTR sitting waiting pateintly for me to start on her, so will be following this closely!!!
circuitR
10-20-2014, 03:35 AM
Looking good mate
That's a detailers dream!
Are you going with the grey colour?
Keep it up, can't wait for more
Thanks, still undecided on colour.
i'll be watching this one, keep em coming :)
Thanks, I hope I can keep the buzz going lol
Can't beat a 1/12 Skyline! Dying to start mine!
May I ask where you got the BBS wheels from? Did they come from the white box art of the 1/12 kit?
Thanks, these were the wheels that came with the kit, yet are not shown on the box.
nice to see a 1/12 r32 build again :)
Thanks, I couldn't find many when I searched.
Awesome work so far & a massive cheers for the heads up on the Wheel fit issue!
Ive got the super rare Veilside R1 Drag 1/12 GTR sitting waiting pateintly for me to start on her, so will be following this closely!!!
Thanks Ash! Yeah, this kit is a challenge getting the suspension right. I had to cut and add styrene for the rear suspension. Also there was a few sinks in the body around the number plates and bumpers. I'll try to show as I go.
That's a detailers dream!
Are you going with the grey colour?
Keep it up, can't wait for more
Thanks, still undecided on colour.
i'll be watching this one, keep em coming :)
Thanks, I hope I can keep the buzz going lol
Can't beat a 1/12 Skyline! Dying to start mine!
May I ask where you got the BBS wheels from? Did they come from the white box art of the 1/12 kit?
Thanks, these were the wheels that came with the kit, yet are not shown on the box.
nice to see a 1/12 r32 build again :)
Thanks, I couldn't find many when I searched.
Awesome work so far & a massive cheers for the heads up on the Wheel fit issue!
Ive got the super rare Veilside R1 Drag 1/12 GTR sitting waiting pateintly for me to start on her, so will be following this closely!!!
Thanks Ash! Yeah, this kit is a challenge getting the suspension right. I had to cut and add styrene for the rear suspension. Also there was a few sinks in the body around the number plates and bumpers. I'll try to show as I go.
nugundam93
10-20-2014, 11:26 AM
only build i've seen is hiroboy's and it is amazing. i've built the 1/12 r32 veilside combat one but would like to redo the body as the paint's already cracked in some places - i'm not pushing through yet as i need either a scan of the decals or a replacement decal sheet.
circuitR
10-20-2014, 08:12 PM
only build i've seen is hiroboy's and it is amazing. i've built the 1/12 r32 veilside combat one but would like to redo the body as the paint's already cracked in some places - i'm not pushing through yet as i need either a scan of the decals or a replacement decal sheet.
Yeah, that's the only 1:12 scale thread I could find too. That's why I decided to start this thread. I can't promise my skills will be awesome as Steve's though lol
Yeah, that's the only 1:12 scale thread I could find too. That's why I decided to start this thread. I can't promise my skills will be awesome as Steve's though lol
GTRfan01
10-21-2014, 04:43 AM
Awesome work so far & a massive cheers for the heads up on the Wheel fit issue!
Ive got the super rare Veilside R1 Drag 1/12 GTR sitting waiting pateintly for me to start on her, so will be following this closely!!!
make sure you post that WIP when you start, id love to see that build...
Ive got the super rare Veilside R1 Drag 1/12 GTR sitting waiting pateintly for me to start on her, so will be following this closely!!!
make sure you post that WIP when you start, id love to see that build...
nugundam93
10-21-2014, 09:29 AM
i'm sure you'll do great too :)
circuitR
10-26-2014, 11:13 PM
A little bit of progress.
Drilled out the disc brakes.
http://tapatalk.imageshack.com/v2/14/10/26/4047b7cf4985249cc4203d9a8f8ec2a4.jpg
Cleaned up the seats.
http://tapatalk.imageshack.com/v2/14/10/26/576100cd6a32301f3bb53e9507ed3f8d.jpg
Started on the rollcage.
http://tapatalk.imageshack.com/v2/14/10/26/f092d3db5bd6c2499fbf9fe3da0dc7ce.jpg
Painted the wheels with Alclad black base.
http://tapatalk.imageshack.com/v2/14/10/26/a6949df09c0b77bbe179b3b496502259.jpg
Also vented the hood.
http://tapatalk.imageshack.com/v2/14/10/26/e88ca4bceb0d7037864de3ff881c3dbd.jpg
Drilled out the disc brakes.
http://tapatalk.imageshack.com/v2/14/10/26/4047b7cf4985249cc4203d9a8f8ec2a4.jpg
Cleaned up the seats.
http://tapatalk.imageshack.com/v2/14/10/26/576100cd6a32301f3bb53e9507ed3f8d.jpg
Started on the rollcage.
http://tapatalk.imageshack.com/v2/14/10/26/f092d3db5bd6c2499fbf9fe3da0dc7ce.jpg
Painted the wheels with Alclad black base.
http://tapatalk.imageshack.com/v2/14/10/26/a6949df09c0b77bbe179b3b496502259.jpg
Also vented the hood.
http://tapatalk.imageshack.com/v2/14/10/26/e88ca4bceb0d7037864de3ff881c3dbd.jpg
circuitR
10-29-2014, 03:37 PM
Bit more of an update, started on re making the plenum chamber, throttle body and pipe work http://tapatalk.imageshack.com/v2/14/10/29/5435f0fdf0ea3420ec56a19a51633bc0.jpg
da_ashman
10-29-2014, 06:30 PM
Oh man thats awesome work on the piping!!!
circuitR
10-30-2014, 12:21 AM
Oh man thats awesome work on the piping!!!
Thanks Ash, there's more to come and it'll be titanium too
Thanks Ash, there's more to come and it'll be titanium too
dada man
10-30-2014, 01:11 PM
awesome work so far man. iv got the veilsides and hks as well. need to get them so badly. heres just some of the other wheels u get with the other skylines for those wondering. ( there ones racing wheel not in here that i have)
http://i171.photobucket.com/albums/u318/dadaman_photos/IMG_4624_zps9ac768d6.jpeg
http://i171.photobucket.com/albums/u318/dadaman_photos/IMG_4624_zps9ac768d6.jpeg
circuitR
10-30-2014, 06:09 PM
awesome work so far man. iv got the veilsides and hks as well. need to get them so badly. heres just some of the other wheels u get with the other skylines for those wondering. ( there ones racing wheel not in here that i have)
Thanks mate, those Nismo wheels are awesome. I'd like to find some tires with a bit less width. But it's period correct. Trying to keep it that 90s street sleeper.
Put some more scaffolding in it last night.
http://tapatalk.imageshack.com/v2/14/10/30/83e60f4695ca166e22bb9eabc269a18b.jpg
Thanks mate, those Nismo wheels are awesome. I'd like to find some tires with a bit less width. But it's period correct. Trying to keep it that 90s street sleeper.
Put some more scaffolding in it last night.
http://tapatalk.imageshack.com/v2/14/10/30/83e60f4695ca166e22bb9eabc269a18b.jpg
circuitR
11-01-2014, 03:56 AM
Painted the wheels today in Alclad polished aluminum. Love this paint. http://tapatalk.imageshack.com/v2/14/11/01/79d1f9dfd98acdd53646fe49ac4802d4.jpg
ChristopheB
11-02-2014, 12:45 AM
Looks good!
tonioseven
11-04-2014, 03:35 PM
Great to see you back at it!! I KNOW this is gonna be cool!!
circuitR
11-05-2014, 02:25 AM
Great to see you back at it!! I KNOW this is gonna be cool!!
Thanks mate, I'll do my best lol
Thanks mate, I'll do my best lol
mrceej
02-10-2015, 10:39 AM
Rims look legit. Can't wait to see more progress on the engine.
speedphreak
02-11-2015, 09:34 AM
I'll be watching this.
Automotive Network, Inc., Copyright ©2024