Suzuki RGV (89)

Start KH7 pickling the chassis or brake fluid, do not worry not damage the plastic.
http://fotos.subefotos.com/9ec8660e0c6195b30fe041da9460c6d4o.jpg
Once the chrome stripping, fill it with putty to dry and sand until a surface as thin as possible.
http://fotos.subefotos.com/3ac2465380b8a90c1fb50610e32b1197o.jpg
Adjust the pieces to make sure the fit is perfect or afraid to fill the frame more.
http://fotos.subefotos.com/bfa25631dec8572b570cbe8a2c797513o.jpg
http://fotos.subefotos.com/91e67b16bc80c136d6502b061006ce99o.jpg
http://fotos.subefotos.com/eb7e4204723a28bd32af709981c7c14co.jpg
When we sanded the pieces clean it well with the help of an electric toothbrush.
http://fotos.subefotos.com/1a06a35e8a732a44983368e5a333a9b2o.jpg
With the help of this putty I simulated a cord welding on the swingarm.
http://fotos.subefotos.com/58342d71f62926a23894b1e74ab7fcdfo.jpg

This one I did for welding with Evergreen rebar
pressing with a flat screwdriver.
http://fotos.subefotos.com/f98ff460a4fa793c928d2253207b048ao.jpg
http://fotos.subefotos.com/3b0618c3ca43eb66c10cb9cd61efd485o.jpg
http://fotos.subefotos.com/f0eac8c4b8b5848b2685f60a40441132o.jpg
Once this is done all the parts separated and prepared to receive a coat of primer.
http://fotos.subefotos.com/1f43d77f079b06d1b0e893d504655f41o.jpg
This is the technique I use to remove the paint pot
without any unpleasant surprises.
http://fotos.subefotos.com/6d0daab9dcbdb4f3efe1b06db15a9bf0o.jpg
This is the result once primed, ready to be painted with bright black and then receive a coat of Alclad polished aluminum.
http://fotos.subefotos.com/39110744f8ecd2431b1388d7babff812o.jpg
I want to show as pinto exhaust, after glossy black enamel paint applied with a coat of Alclad Chrome let it dry and start to implement transparent colors, blue, orange, red, to achieve the desired tone.
http://fotos.subefotos.com/69684931b86e631d0f288dbf642648edo.jpg
http://fotos.subefotos.com/2d4fe24b6ce63a935ff477523e7355c9o.jpg
http://fotos.subefotos.com/8763675bc837749ffacdb0540807f9c6o.jpg
http://fotos.subefotos.com/f20a52e7bd1a5c274cf0a9e2a9e1c66fo.jpg
When we have we can highlight tone painting with acrylic XF56 welds.
http://fotos.subefotos.com/a3137e93ec40f12c3a73790c56e076d0o.jpg

nice effect, that exhaust & detailing looks great! bravo!

The engine has been key to this model I did the close to reality.
http://fotos.subefotos.com/0859adbf0046acc36c14215a8d8bd786o.jpg
http://fotos.subefotos.com/176a62a26cdfc38d0325f0c955ff06c0o.jpg
http://fotos.subefotos.com/7fd8eb9a0b4b28fb087dc29d691825a9o.jpg
http://fotos.subefotos.com/67251df6ba248d14c68bef87185234b1o.jpg
The rear shock sensor is manufactured with Evergreen rebar.
http://fotos.subefotos.com/479522f4be6a3fde786d8f90b2dfc54eo.jpg
http://fotos.subefotos.com/4bc8771e80c3ce45a859633b4d3544b8o.jpg
http://fotos.subefotos.com/01e2bb11c254b09f60e8908bf33b286ao.jpg
http://fotos.subefotos.com/eee18a157d3239547926db7e51ddf550o.jpg
http://fotos.subefotos.com/a4edceeed887be4cecc73c51e6aa8037o.jpg

definitely looking forward to this very detailed build. nice work!

Greetings again, I will explain the process of placing the decals, I personally moisten first part where you placed the decal with Microset, I place the decal in place and I carefully applying layers of Microsol, helping me a dryer hair on the decal applied heat until it is totally adapted to the surface.
http://fotos.subefotos.com/867f697871edb2701623961d45994a8eo.jpg
http://fotos.subefotos.com/ed87972aff0d9dd5d70ef19c7a586fa0o.jpg
http://fotos.subefotos.com/0d20830b35b8ef5658c7d92ab2708dfao.jpg
http://fotos.subefotos.com/fec659281e9feadc7439ff184d02da77o.jpg
To adapt this decal had to trim the ends.
http://fotos.subefotos.com/b13f38c321e296a1114c11b4ec165362o.jpg
http://fotos.subefotos.com/8f5011fe70c7e8e024d8811d6a6fef6co.jpg
Colin Decals broke down and I had to make other with decal from Studio 27.
http://fotos.subefotos.com/010361a0b75127e828754d7cc2b52283o.jpg
http://fotos.subefotos.com/555ba7cc2fa370ddd8dc426f1d8b2de8o.jpg
http://fotos.subefotos.com/0d66456f09ef1bf6ade225e0623486d2o.jpg
http://fotos.subefotos.com/2ebe8c913af81527e9175b2f4363b360o.jpg
The tank is mounted in the fairing to align the decals.
http://fotos.subefotos.com/676f0aa76eb41449f1e83423ddb206d0o.jpg
Pieces in the drying process after receiving a generous layer of varnish.
http://fotos.subefotos.com/34f16ba706fd7c7f13df9e7dc1cbdd08o.jpg

MASTER!!!! great work friend!! (el zorrito)

very nice work.

Superb!

Greetings, I put a picture dela well advanced bike in its assembly.
http://fotos.subefotos.com/7d4fe17d5f5e02f60913f6be89080b56o.jpg
http://fotos.subefotos.com/b5d5784896a81d2c53d5bdffb2444e51o.jpg
http://fotos.subefotos.com/088822b6b55a30aaba1562d28d665387o.jpg
http://fotos.subefotos.com/011d7eb9b4216c94862ceb60cc46f27co.jpg
http://fotos.subefotos.com/b6fbd2d42268904f6a38597c2d1bf474o.jpg
http://fotos.subefotos.com/95ed4a7cf01de6859a44ae279f600414o.jpg
http://fotos.subefotos.com/492a7e6870e0902bd5583ddca333d929o.jpg
http://fotos.subefotos.com/60f83e8452ebdb3f220415b232e7d515o.jpg
http://fotos.subefotos.com/f9bdfd0f87e86854c6be8d02c0612587o.jpg
http://fotos.subefotos.com/2d3394f5c855b84cc2d79c597304ff74o.jpg
http://fotos.subefotos.com/96e136e47ae9f21ad483a6cb2089bdf2o.jpg
I hope you like it has been, thanks.

SUPERB!! Really, really nice job......

ATB....

Really superb work on a bike that needs total detail added from scratch since there is not a set for it.

I have this one and hope I can get it to come out that good!

well done churripay.
I wasn't aware that you finished this one until I went back and re-read the thread.
John

originally carbon decals are too bad!they broken me too:sly:
you made a great work.i like very much the rear sospension:cheers:

originally carbon decals are too bad!they broken me too:sly:
you made a great work.i like very much the rear sospension:cheers:

Thanks for the feedback, and with respect to carbon decals, you're right are lousy, greetings.

Really nice build and great details added!