I found them!!!!
Panoz60
01-17-2013, 12:53 PM
In a previous post, I was looking for a way to simplify alignment adjustments. Well, I was net-surfing and found what I trying to describe what I was looking for when I saw on it another GTRA that I didn't buy. the link and the pic kinda explain themselves.. And..It's cheap!
http://www.howeracing.com/p-7566-internal-hardware.aspx
http://i209.photobucket.com/albums/bb222/roval41/2286.png
All you have to do is weld a plate on the outside of your current mounts, like this....
http://i209.photobucket.com/albums/bb222/roval41/22688.png
So.. loosen the vertical bolt in the upper picture, then use the horizontal bolt to make your adjustments, then tighten the vertical bolt again. Done!
http://www.howeracing.com/p-7566-internal-hardware.aspx
http://i209.photobucket.com/albums/bb222/roval41/2286.png
All you have to do is weld a plate on the outside of your current mounts, like this....
http://i209.photobucket.com/albums/bb222/roval41/22688.png
So.. loosen the vertical bolt in the upper picture, then use the horizontal bolt to make your adjustments, then tighten the vertical bolt again. Done!
CMPanoz
01-17-2013, 02:06 PM
Our GTS has two adjustment bolts standard. The WC cars we have the nuts welded onto / into the frame but the bolts are missing. They do make adjusting camber easy.
Cobra4B
01-18-2013, 08:59 AM
The only downside I see is that if you ever messed up the threads on that block you'd have to cut the front plate off to replace it.
Automotive Network, Inc., Copyright ©2024